[ANSYS Meshing] about " Minimum Edge Length "

hotboy · January 14, 2016, 23:04

Hello friends!
The ansys meshing user guide prompt "Minimum Edge Length - Read-only indication of the smallest edge length in the part".
minedge.PNG
We can't change the value of minimum edge length?If I change it ,what's the influence?
Thank you very much!
your sincerely hotboy!

Kapi · January 17, 2016, 17:43

Minimum Edge Length is just an indication what's minimum Edge length in your model. You cant change it manually.
It changes automatically if you put edge sizing, face sizing or any other Constraints on your model.

Cheers
KAPI

hotboy · January 17, 2016, 21:05

Quote:

Originally Posted by Kapi

Minimum Edge Length is just an indication what's minimum Edge length in your model. You cant change it manually.
It changes automatically if you put edge sizing, face sizing or any other Constraints on your model.

Cheers
KAPI

Dear KAPI!
Thank you very much!

ViLaks · April 25, 2018, 02:32

Hi ,

In my model, in DM (using small entity search) I found the shortest edge length to be 0.4 mm. But in Meshing, the minimum edge length is shown of the order of 10^-4 mm. Is this an error ? Because, this seems to create problems in meshing, skewness being 0.999 or 1. IF not, why is there such a difference in edge length in DM and meshing?

With Regards
Vignesh

R J Aditya · January 8, 2020, 04:20

Hi Vighnesh
I am also facing exactly same issue. Did you find out why this was occurring, please do let me know if you find out.

ViLaks · January 9, 2020, 04:52

Quote:

Originally Posted by R J Aditya

Hi Vighnesh
I am also facing exactly same issue. Did you find out why this was occurring, please do let me know if you find out.

Hi Adithya,

I dont know yet. But what I did was repair the geometry until I get a reasonable minimum edge length in Mesher (Approx 0.1 mm and above)

January 14, 2016, 23:04	about " Minimum Edge Length "	#1
hotboy Member wanghuo Join Date: Aug 2014 Posts: 89 Rep Power: 12	Hello friends! The ansys meshing user guide prompt "Minimum Edge Length - Read-only indication of the smallest edge length in the part". minedge.PNG We can't change the value of minimum edge length?If I change it ,what's the influence? Thank you very much! your sincerely hotboy!

April 25, 2018, 02:32		#4
ViLaks Member Vignesh Lakshmanan Join Date: Nov 2016 Posts: 79 Rep Power: 10	Hi , In my model, in DM (using small entity search) I found the shortest edge length to be 0.4 mm. But in Meshing, the minimum edge length is shown of the order of 10^-4 mm. Is this an error ? Because, this seems to create problems in meshing, skewness being 0.999 or 1. IF not, why is there such a difference in edge length in DM and meshing? With Regards Vignesh R J Aditya likes this.

January 8, 2020, 04:20	Same issue	#5
R J Aditya New Member R J Aditya Join Date: Jan 2020 Posts: 1 Rep Power: 0	Hi Vighnesh I am also facing exactly same issue. Did you find out why this was occurring, please do let me know if you find out.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to set periodic boundary conditions	Ganesh	FLUENT	15	November 18, 2020 07:09
calculating cell edge length in 2D and call UDM into other udf code	pibea	Fluent UDF and Scheme Programming	0	November 30, 2014 06:27
edge length of a cell-UDF	behest	Fluent UDF and Scheme Programming	0	March 10, 2014 13:32
Where's the singularity/mesh flaw?	audrich	FLUENT	3	August 4, 2009 02:07
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 12:55

January 17, 2016, 17:43		#2
Kapi Senior Member Join Date: Apr 2014 Location: Melbourne Posts: 584 Rep Power: 14	Minimum Edge Length is just an indication what's minimum Edge length in your model. You cant change it manually. It changes automatically if you put edge sizing, face sizing or any other Constraints on your model. Cheers KAPI