[ANSYS Meshing] meshing mixing elbow by HEX-mesh

nasser_tmt · July 28, 2015, 06:41

Hi everybody , I'm trying to mesh this elbow (attachment below ) but there is error I couldn't identify it .

if anyone here has a way to mesh it , please tell me at as soon

Kapi · July 28, 2015, 19:32

Hi Nasser,

this question is already being answered in your previous post.
http://www.cfd-online.com/Forums/ans...-creation.html
Please dont start new thread with same topic.
Try to ask questions in previous threads to get help

Cheers
KAPI

nasser_tmt · July 29, 2015, 03:16

Dear Kapi ,
I have already read all the topics which you have posted and i do appreciate your concern, but my model has two inlet as shown and I'm having trouble with meshing it, I have used all the methods mentioned previously but with no use .
If you have any tips regarding this I would very much appreciate your help
Regards ,
Nasser .

hwet · July 29, 2015, 04:41

Make a tet mesh with inflation question answered...

Kapi · July 29, 2015, 19:24

Hi Nasser,

the threads I posted is one of the best way to get good hex mesh, if you are not able to achieve it then why not try what Hwet says and make tet mesh with inflation. It will give same accuracy if you use inflation.

Cheers
KAPI

July 29, 2015, 04:41		#4
hwet Senior Member Join Date: Mar 2014 Posts: 375 Rep Power: 13	Make a tet mesh with inflation question answered... nasser_tmt likes this.

July 29, 2015, 19:24		#5
Kapi Senior Member Join Date: Apr 2014 Location: Melbourne Posts: 584 Rep Power: 14	Hi Nasser, the threads I posted is one of the best way to get good hex mesh, if you are not able to achieve it then why not try what Hwet says and make tet mesh with inflation. It will give same accuracy if you use inflation. Cheers KAPI nasser_tmt likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] --> FOAM FATAL ERROR: Trying to specify a boundary face	A.A.	OpenFOAM Meshing & Mesh Conversion	41	June 26, 2020 08:06
[ANSYS Meshing] guidance about refining hex mesh?	hamidciv	ANSYS Meshing & Geometry	15	July 27, 2015 03:28
[ICEM] ICEM meshing - Tips from forum - Collection	shereez234	ANSYS Meshing & Geometry	0	June 16, 2015 10:47
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 07:42
Meshing: Smoothing Mesh for LES	tobitj	STAR-CCM+	4	February 26, 2013 17:51

July 28, 2015, 19:32		#2
Kapi Senior Member Join Date: Apr 2014 Location: Melbourne Posts: 584 Rep Power: 14	Hi Nasser, this question is already being answered in your previous post. http://www.cfd-online.com/Forums/ans...-creation.html Please dont start new thread with same topic. Try to ask questions in previous threads to get help Cheers KAPI

July 29, 2015, 03:16		#3
nasser_tmt New Member nasser toul Join Date: Jul 2015 Posts: 10 Rep Power: 11	Dear Kapi , I have already read all the topics which you have posted and i do appreciate your concern, but my model has two inlet as shown and I'm having trouble with meshing it, I have used all the methods mentioned previously but with no use . If you have any tips regarding this I would very much appreciate your help Regards , Nasser .