[ANSYS Meshing] structured mesh

nasser_tmt · July 18, 2015, 23:57

Hi everybody , I'm using ANSYS 14.5 I don't know how can I create structured mesh in 3D model such as mixing elbow , if anyone knows tell me please

hwet · July 19, 2015, 21:00

search the forum this has been discussed before

nasser_tmt · July 19, 2015, 21:50

thank you alot , I have already searched before and I didn't find it ...
If there are some tutorials or PDFs talking about structured mesh please send me it by mail "nassertmt@gmail.com"

hwet · July 19, 2015, 23:48

Using tet mesh with inflation would be good enough.

For hex if you want to keep it simple using multizone mesh method.

Or if you want to sweep you can create slice of the geometry. This will be complicated as the faces would have to be lofted from one end to the other for a pipe bend.

Just keep it simple and use tet mesh with inflation you will get the same results.

July 18, 2015, 23:57	structured mesh	#1
nasser_tmt New Member nasser toul Join Date: Jul 2015 Posts: 10 Rep Power: 11	Hi everybody , I'm using ANSYS 14.5 I don't know how can I create structured mesh in 3D model such as mixing elbow , if anyone knows tell me please

July 19, 2015, 21:00		#2
hwet Senior Member Join Date: Mar 2014 Posts: 375 Rep Power: 13	search the forum this has been discussed before nasser_tmt likes this.

July 19, 2015, 21:50		#3
nasser_tmt New Member nasser toul Join Date: Jul 2015 Posts: 10 Rep Power: 11	thank you alot , I have already searched before and I didn't find it ... If there are some tutorials or PDFs talking about structured mesh please send me it by mail "nassertmt@gmail.com" Last edited by nasser_tmt; July 19, 2015 at 23:35.

July 19, 2015, 23:48		#4
hwet Senior Member Join Date: Mar 2014 Posts: 375 Rep Power: 13	Using tet mesh with inflation would be good enough. For hex if you want to keep it simple using multizone mesh method. Or if you want to sweep you can create slice of the geometry. This will be complicated as the faces would have to be lofted from one end to the other for a pipe bend. Just keep it simple and use tet mesh with inflation you will get the same results. nasser_tmt and Mina_Mbg like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 10:38
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 04:52
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM	kawamatt2	ANSYS Meshing & Geometry	17	December 20, 2011 12:45
Block structured hexagonal mesh vs automated tetra mesh inside Workbench for CFD	Chander	CFX	3	November 27, 2011 17:24
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 10:38