[ICEM] Icem blocking menu activation

Alexandre007 · November 23, 2014, 14:13

Hello everybody,

Config: Ansys R14.5 (student license)
Problem: No blocking menu in ICEM.

Explanation: In my version of ICEM I don't found the blocking menu but i see it always in the tutorial. Do you know if it's specific to student license or if I can active it?

Many thanks for your answer!

Alexandre

PSYMN · November 24, 2014, 09:34

You will find a "Blocking" checkbox under "Settings => Product"...

Turn it on and then restart ICEM CFD...

Alexandre007 · November 25, 2014, 11:36

This is the trick, it's working now,

Thanks a lot for your answer!

gemxx · February 25, 2015, 09:52

I tried what you said here but it didn`t work. I click the "blocking" button and I restart the icem but I can`t still see the blacking part. When I click again the "setting--> product" , I see that the blocking button is not clicked although I did. Could you help me please ? Because I study on my thesis and I have to open this part.

November 23, 2014, 14:13	Icem blocking menu activation	#1
Alexandre007 New Member Join Date: Nov 2014 Posts: 6 Rep Power: 12	Hello everybody, Config: Ansys R14.5 (student license) Problem: No blocking menu in ICEM. Explanation: In my version of ICEM I don't found the blocking menu but i see it always in the tutorial. Do you know if it's specific to student license or if I can active it? Many thanks for your answer! Alexandre

November 24, 2014, 09:34	Settings => Product	#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	You will find a "Blocking" checkbox under "Settings => Product"... Turn it on and then restart ICEM CFD... Alexandre007 and Ionut G like this. __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Workbench] Problem with hexa blocking in ICEM on a parametric study	Jeremie84	ANSYS Meshing & Geometry	4	May 13, 2017 13:13
[ICEM] Tutorial : Blocking of Two types of T-Junctions in ICEM CFD	Far	ANSYS Meshing & Geometry	5	August 16, 2016 04:26
[ICEM] ICEM Beginner Help - Blocking 3D Vane Vortex Generator	Crank-Shaft	ANSYS Meshing & Geometry	10	March 23, 2013 22:24
[ICEM] Structured grid without blocking in ICEM	BahaZero	ANSYS Meshing & Geometry	19	March 5, 2013 12:36
[ICEM] Using Blocking with ICEM (infinite blocking lines appeared)	Touré	ANSYS Meshing & Geometry	2	August 5, 2012 18:27

November 25, 2014, 11:36		#3
Alexandre007 New Member Join Date: Nov 2014 Posts: 6 Rep Power: 12	This is the trick, it's working now, Thanks a lot for your answer!

February 25, 2015, 09:52		#4
gemxx New Member gemxx Join Date: Feb 2015 Posts: 28 Rep Power: 11	I tried what you said here but it didn`t work. I click the "blocking" button and I restart the icem but I can`t still see the blacking part. When I click again the "setting--> product" , I see that the blocking button is not clicked although I did. Could you help me please ? Because I study on my thesis and I have to open this part.