[ICEM] Section View in ICEM (Easy Question)!!!

abuono1 · July 25, 2013, 20:08

This is my first time posting a question to this forum, so I'm sorry if its wrong in any way. So, in ANSYS Meshing I know how to slice the mesh to see a cross section view of the mesh gradient around a tool body. However, in ICEM I haven't found that tool to allow me to be able to do the same thing I can in ANSYS Meshing. So I was wondering if any of you guys know how to do this in ICEM???

diamondx · July 26, 2013, 01:30

On your left you have the tree for "geometry", "mesh", "blocking". Right button on mesh -> cut plane -> Show cut plane

abuono1 · July 26, 2013, 15:22

Thank you so much, I figured it out!

itsme_kit · March 20, 2014, 11:04

Quote:

Originally Posted by diamondx

On your left you have the tree for "geometry", "mesh", "blocking". Right button on mesh -> cut plane -> Show cut plane

Hi

Why my view of cut-plane like this? see attached pic

Thanks in advance

Far · March 20, 2014, 12:29

Quote:

Originally Posted by itsme_kit

Hi

Why my view of cut-plane like this? see attached pic

Thanks in advance

did you delete the block ?

diamondx · March 21, 2014, 15:44

check volume element too...

July 25, 2013, 20:08	Section View in ICEM (Easy Question)!!!	#1
abuono1 New Member Armand Join Date: Jul 2013 Posts: 4 Rep Power: 13	This is my first time posting a question to this forum, so I'm sorry if its wrong in any way. So, in ANSYS Meshing I know how to slice the mesh to see a cross section view of the mesh gradient around a tool body. However, in ICEM I haven't found that tool to allow me to be able to do the same thing I can in ANSYS Meshing. So I was wondering if any of you guys know how to do this in ICEM???

July 26, 2013, 01:30		#2
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 29	On your left you have the tree for "geometry", "mesh", "blocking". Right button on mesh -> cut plane -> Show cut plane __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

March 21, 2014, 15:44		#6
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 29	check volume element too... apu111 and Shawnnnn like this. __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Question about ICEM mesh output to CFX	lnk	ANSYS Meshing & Geometry	0	July 27, 2012 16:39
[ICEM] Question about ICEM script for mesh generation	lnk	ANSYS Meshing & Geometry	3	July 23, 2012 15:03
Question about creating porous domain interface for CFX by ICEM	lnk	CFX	2	July 21, 2012 07:48
Quick and easy QUESTION	Freeman	Main CFD Forum	12	December 13, 2005 16:00
Question about Flow's Cross Section	Jaan Pu	Main CFD Forum	0	March 15, 2004 01:44

July 26, 2013, 15:22		#3
abuono1 New Member Armand Join Date: Jul 2013 Posts: 4 Rep Power: 13	Thank you so much, I figured it out!