|
[Sponsors] |
![]() |
![]() |
#1 |
Member
Roberto Pieri
Join Date: Feb 2012
Location: Milan
Posts: 57
Rep Power: 14 ![]() |
Hi everyone,
I am trying to build a 2d hybrid mesh. In particular I built a structured mesh around a NACA0012 (first picture), using block 2d planar, and converted it to unstructured. Now, setting global mesh parameters with Patch Dependent and Respect line elements (second picture), I compute the unstructured mesh obtaining the result in the last picture. I am not able to build the unstructured mesh from the structured one. Do you have ideas to solve this problem? Cheers, Roberto. |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
Domenico Sgrò
Join Date: Dec 2012
Location: Milan, IT
Posts: 2
Rep Power: 0 ![]() |
Hi Roberto!
I have a similar problem, finding a solution would be very useful also for me ![]() ![]() Domenico |
|
![]() |
![]() |
![]() |
![]() |
#3 |
Member
|
Hi mates,
It seems that you should decrease maximum size. By the way no need of blocking. You can actually make boundary layer with "no. of layers" option in curve meshing. See http://www.cfd-online.com/Forums/ans...e-meshing.html |
|
![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
|
ok. Here is the tutorial on handling 2d hybrid meshing in ICEM CFD. Hope you will enjoy it.
https://dl.dropboxusercontent.com/u/..._2dairfoil.rar |
|
![]() |
![]() |
![]() |
![]() |
#5 |
New Member
Shravan
Join Date: Sep 2014
Posts: 4
Rep Power: 11 ![]() |
Please tell me how to get a structured mesh.
|
|
![]() |
![]() |
![]() |
Tags |
2d hybrid grid, naca0012 |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to set periodic boundary conditions | Ganesh | FLUENT | 15 | November 18, 2020 06:09 |
[ICEM] Hybrid mesh for 2D boundary layer | Bigio | ANSYS Meshing & Geometry | 33 | November 18, 2019 09:15 |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
Mesh motion with Translation & Rotation | Doginal | CFX | 2 | January 12, 2014 06:21 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |