[DesignModeler] Merge Surface Body and Solid Body

prikeyma · July 11, 2012, 18:31

Hi,

Is there a way to merge a surface body and a solid body using the tools in Design Modeler?

Thanks in advance.

nauman55 · July 15, 2012, 11:25

you can do that by using enclosure option and then before creating the enclosure selecting the merge part option as yes. let me know if problem is resolved.
regards

oewnce932c · April 24, 2013, 12:55

found your thread, because want to join two or more Surfaces in DesignModeler.
freeze is defenetly good, did't really understood why)
my solution was to use create-> Body operation -> type SEW -> and select solids. that work for me

found it here https://www.sharcnet.ca/Software/Flu...onfeature.html ctrl+f "sew"

mjthomp3 · June 11, 2014, 18:17

Quote:

Originally Posted by nauman55

you can do that by using enclosure option and then before creating the enclosure selecting the merge part option as yes. let me know if problem is resolved.
regards

after setting the tolerance to 0.15 from 0.0015 (the default) it worked!! so happy.....

FJSJ · April 15, 2015, 11:47

I know it has been a long time, but I would like to know if this is possible (I mean, Merge Surface Body and Solid Body). I have done what nauman55 shared with us but I couldn't get it. And, at the same time, "sew" tool is just for surfaces. So, is DM able to perform this action?

oewnce932c · April 16, 2015, 08:01

in DM is not possible to merge Surface Body and Solid Body

July 11, 2012, 18:31	Merge Surface Body and Solid Body	#1
prikeyma New Member Keyma Join Date: Aug 2010 Posts: 16 Rep Power: 16	Hi, Is there a way to merge a surface body and a solid body using the tools in Design Modeler? Thanks in advance.

July 15, 2012, 11:25	use enclosure feature with parts merge option yes	#2
nauman55 Member nauman hashmi Join Date: Jun 2012 Posts: 54 Rep Power: 14	you can do that by using enclosure option and then before creating the enclosure selecting the merge part option as yes. let me know if problem is resolved. regards

April 24, 2013, 12:55		#3
oewnce932c Member Pjotr Join Date: Mar 2012 Posts: 30 Rep Power: 14	found your thread, because want to join two or more Surfaces in DesignModeler. freeze is defenetly good, did't really understood why) my solution was to use create-> Body operation -> type SEW -> and select solids. that work for me found it here https://www.sharcnet.ca/Software/Flu...onfeature.html ctrl+f "sew" rahulv, Jayant and alex_gtz like this.

April 16, 2015, 08:01		#6
oewnce932c Member Pjotr Join Date: Mar 2012 Posts: 30 Rep Power: 14	in DM is not possible to merge Surface Body and Solid Body __________________ yachting_rus cup world amateur racing tour WWW.YRC.DK

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Re-meshing a deformable solid body in a fluid	brashear	CFX	6	December 12, 2011 12:13
how to move a solid body along a clear line	m.r_khani	FLUENT	0	November 26, 2011 08:04
Rigid Body State Variables in Solid Immersed Simulation	Hamidreza	CFX	1	October 19, 2009 07:14
creating solid from car body surface data	Mehmet Yilmaz	FLUENT	1	January 16, 2008 07:57
Free surface and moving body	Steve	FLUENT	0	August 18, 2004 03:54

April 15, 2015, 11:47		#5
FJSJ Senior Member Javi Join Date: Jan 2013 Posts: 276 Rep Power: 16	I know it has been a long time, but I would like to know if this is possible (I mean, Merge Surface Body and Solid Body). I have done what nauman55 shared with us but I couldn't get it. And, at the same time, "sew" tool is just for surfaces. So, is DM able to perform this action?