|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Issy
Join Date: Nov 2014
Posts: 9
Rep Power: 11 ![]() |
Hello everyone,
I use ANSA for cleaning the geometry and was told to mesh it with STL (Auto-STL) for later use with Star-CCM+. Cleaning worked really fine but when export the STL i have problems regarding fineness and the later meshing in CCM+. It gets much better when I i decrease the MaxLength. But then my whole model has too many faces. How can I mesh (STL) only specific parts with for example max length 0.07 and other parts with 0.5. I tried it but after meshing the visible parts always one part of the mesh was missing. Isnt there a list where I can enter the max length for each pid? |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
senthur rajasekar
Join Date: Nov 2014
Posts: 16
Rep Power: 11 ![]() |
yes its possible. you can assign diff size for diff PIDs.
|
|
![]() |
![]() |
![]() |
![]() |
#3 |
New Member
Issy
Join Date: Nov 2014
Posts: 9
Rep Power: 11 ![]() |
||
![]() |
![]() |
![]() |
![]() |
#4 |
New Member
T.B
Join Date: Oct 2012
Location: Norway
Posts: 8
Rep Power: 13 ![]() |
In ANSA 16 you simply select the PIDs in auto-stl, in earlier versions you must freeze all your mesh except the patch you want to remesh. (Best is to freeze all and then unfreeze the parts you are working on)
|
|
![]() |
![]() |
![]() |
![]() |
#5 |
New Member
Issy
Join Date: Nov 2014
Posts: 9
Rep Power: 11 ![]() |
||
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Gmsh] Vertex numbering is dense | KateEisenhower | OpenFOAM Meshing & Mesh Conversion | 7 | August 3, 2015 10:49 |
[snappyHexMesh] Multi region meshing & recovering the original patch names | fluidpath | OpenFOAM Meshing & Mesh Conversion | 4 | May 19, 2013 19:13 |
[Workbench] Meshing and export mesh from STL geometry | alerfreire | ANSYS Meshing & Geometry | 0 | March 26, 2013 09:25 |
Meshing complex white-light/GOM based STL models | jola | Main CFD Forum | 13 | January 30, 2012 01:35 |
[ICEM] Hexa meshing a STL file in aerospace industry | DavidCarlsson | ANSYS Meshing & Geometry | 0 | January 20, 2012 04:34 |