User contributions
From CFD-Wiki
- 15:51, 10 August 2020 (diff | hist) CONVERGE FAQ (→What are the benefits of using inlaid mesh in spray simulations, and what are the limitations?) (top)
- 20:29, 24 July 2020 (diff | hist) CONVERGE FAQ
- 20:25, 24 July 2020 (diff | hist) CONVERGE FAQ
- 16:33, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I see how long CONVERGE spends on different processes (e.g., spray, combustion, and load balancing)?)
- 16:29, 21 July 2020 (diff | hist) CONVERGE FAQ (→Can I use super-cycling for predicting a steady-state temperature field in a non-engine case? If so, how do I set supercycle_stage_num and supercycle_stage_interval?)
- 16:29, 21 July 2020 (diff | hist) CONVERGE FAQ (→Can we perform an all-in-one coolant/combustion/solid simulation?)
- 16:27, 21 July 2020 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 16:26, 21 July 2020 (diff | hist) CONVERGE FAQ (→My spray simulation runs slowly due to significant wall film formation. Is there a way to increase the simulation speed?)
- 16:23, 21 July 2020 (diff | hist) CONVERGE FAQ (→What are some aspects of the 0D reactor modeled in CONVERGE?)
- 16:22, 21 July 2020 (diff | hist) CONVERGE FAQ (→How do I account for the fuel’s cetane number?)
- 16:10, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I update the input files of a simulation from an older version of CONVERGE to a newer version?)
- 14:16, 21 July 2020 (diff | hist) CONVERGE FAQ (→What are some aspects of the 0D reactor modeled in CONVERGE?)
- 14:16, 21 July 2020 (diff | hist) CONVERGE FAQ (→What ignition delay (ID) definitions does CONVERGE use?)
- 14:16, 21 July 2020 (diff | hist) CONVERGE FAQ (→Can I use chemistry tools to explore the flammability limits of a mixture?)
- 14:15, 21 July 2020 (diff | hist) CONVERGE FAQ (→Can I use chemistry tools to explore the flammability limits of a mixture?)
- 14:09, 21 July 2020 (diff | hist) CONVERGE FAQ (→I see that CONVERGE offers various MPI implementations (MPICH2, HPMPI, OPEN MPI, PMPI). Which one should I use?)
- 14:08, 21 July 2020 (diff | hist) CONVERGE FAQ (→COMBUSTION AND EMISSIONS)
- 03:57, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I see how long CONVERGE spends on different processes (e.g., spray, combustion, and load balancing)?)
- 03:57, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I see how long CONVERGE spends on different processes (e.g., spray, combustion, and load balancing)?)
- 03:55, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I know at what time a restart file has been written? And how do I know if the file has been written properly?)
- 03:54, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I know at what time a restart file has been written? And how do I know if the file has been written properly?)
- 03:52, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I know at what time a restart file has been written? And how do I know if the file has been written properly?)
- 03:52, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I know at what time a restart file has been written? And how do I know if the file has been written properly?)
- 03:51, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I know at what time a restart file has been written? And how do I know if the file has been written properly?)
- 03:51, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I know at what time a restart file has been written? And how do I know if the file has been written properly?)
- 03:50, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I know at what time a restart file has been written? And how do I know if the file has been written properly?)
- 03:48, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I know at what time a restart file has been written? And how do I know if the file has been written properly?)
- 03:47, 21 July 2020 (diff | hist) CONVERGE FAQ (→Is it possible to optimize geometry features in CONVERGE?)
- 03:45, 21 July 2020 (diff | hist) CONVERGE FAQ (→How can I simulate thermal barrier coating using CONVERGE?)
- 03:45, 21 July 2020 (diff | hist) CONVERGE FAQ (→In the KH-RT model, which parameters can be adjusted to change the drop size?)
- 03:43, 21 July 2020 (diff | hist) CONVERGE FAQ (→Can I use a chemistry tool to merge two chemical mechanisms?)
- 03:43, 21 July 2020 (diff | hist) CONVERGE FAQ (→What quantities can I calculate with 1D tools?)
- 03:42, 21 July 2020 (diff | hist) CONVERGE FAQ (→What does the 0D engine RON/MON estimator do?)
- 03:40, 21 July 2020 (diff | hist) CONVERGE FAQ (→What ignition delay (ID) definitions does CONVERGE use?)
- 03:39, 21 July 2020 (diff | hist) CONVERGE FAQ (→What are some aspects of the 0D reactor modeled in CONVERGE?)
- 03:39, 21 July 2020 (diff | hist) CONVERGE FAQ (→What can I calculate with 0D tools?)
- 03:38, 21 July 2020 (diff | hist) CONVERGE FAQ (→What can I do with CONVERGE’s chemistry tools?)
- 03:36, 21 July 2020 (diff | hist) CONVERGE FAQ (→Are there any new types of AMR available in CONVERGE 3.0?)
- 03:35, 21 July 2020 (diff | hist) CONVERGE FAQ (→How does y+ AMR restriction work? Can I use this feature to ensure I have an acceptable mesh near the wall for the law-of-the-wall models?)
- 03:34, 21 July 2020 (diff | hist) CONVERGE FAQ (→What are some of the pre-processing requirements and recommendations for a four-stroke engine surface data file?)
- 03:33, 21 July 2020 (diff | hist) CONVERGE FAQ (→My case crashed due to a problem with sealing. What should I do?)
- 03:28, 21 July 2020 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 03:27, 21 July 2020 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 03:26, 21 July 2020 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 03:25, 21 July 2020 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 03:23, 21 July 2020 (diff | hist) CONVERGE FAQ (→Can I use chemistry tools to explore the flammability limits of a mixture?)
- 03:22, 21 July 2020 (diff | hist) N File:Extiction.png (top)
- 03:22, 21 July 2020 (diff | hist) N File:Ignition delay.png (top)
- 03:21, 21 July 2020 (diff | hist) CONVERGE FAQ (→What ignition delay (ID) definitions does CONVERGE use?)
- 03:20, 21 July 2020 (diff | hist) CONVERGE FAQ (→What ignition delay (ID) definitions does CONVERGE use?)
- 03:20, 21 July 2020 (diff | hist) CONVERGE FAQ (→What ignition delay (ID) definitions does CONVERGE use?)
- 03:12, 21 July 2020 (diff | hist) CONVERGE FAQ (→What are some aspects of the 0D reactor modeled in CONVERGE?)
- 03:12, 21 July 2020 (diff | hist) CONVERGE FAQ (→What are some aspects of the 0D reactor modeled in CONVERGE?)
- 03:10, 21 July 2020 (diff | hist) CONVERGE FAQ (→What are some aspects of the 0D reactor modeled in CONVERGE?)
- 03:08, 21 July 2020 (diff | hist) N File:Control volume.png (top)
- 22:47, 20 July 2020 (diff | hist) CONVERGE FAQ (→What is the surrogate blender?)
- 22:39, 20 July 2020 (diff | hist) CONVERGE FAQ (→How can I know at what time a restart file has been written? And how do I know if the file has been written properly?)
- 22:38, 20 July 2020 (diff | hist) CONVERGE FAQ (→How can machine learning be used to enhance optimization of CONVERGE cases?)
- 22:38, 20 July 2020 (diff | hist) CONVERGE FAQ (→How can machine learning be used to enhance optimization of CONVERGE cases?)
- 22:38, 20 July 2020 (diff | hist) CONVERGE FAQ (→Is it possible to optimize geometry features in CONVERGE?)
- 22:38, 20 July 2020 (diff | hist) CONVERGE FAQ (→Is optimizing a mechanism using the mechtune capability similar to optimizing a CFD case?)
- 22:36, 20 July 2020 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:36, 20 July 2020 (diff | hist) CONVERGE FAQ (→Must I increase the number of spray parcels when I refine the grid?)
- 22:34, 20 July 2020 (diff | hist) CONVERGE FAQ
- 22:30, 20 July 2020 (diff | hist) CONVERGE FAQ (→My RANS simulation shows cycle-to-cycle variation. Is this variation to be expected?)
- 22:29, 20 July 2020 (diff | hist) CONVERGE FAQ (→My RANS simulation shows cycle-to-cycle variation. Is this variation to be expected?)
- 22:26, 20 July 2020 (diff | hist) CONVERGE FAQ
- 22:19, 20 July 2020 (diff | hist) CONVERGE FAQ
- 22:10, 20 July 2020 (diff | hist) CONVERGE FAQ
- 22:05, 20 July 2020 (diff | hist) CONVERGE FAQ
- 22:01, 20 July 2020 (diff | hist) CONVERGE FAQ
- 21:53, 20 July 2020 (diff | hist) CONVERGE FAQ
- 21:46, 20 July 2020 (diff | hist) CONVERGE FAQ
- 21:43, 20 July 2020 (diff | hist) CONVERGE FAQ
- 21:38, 20 July 2020 (diff | hist) CONVERGE FAQ
- 16:32, 15 July 2020 (diff | hist) CONVERGE FAQ
- 22:07, 14 July 2020 (diff | hist) CONVERGE FAQ (Undo revision 25227 by Ywang89 (talk))
- 22:01, 14 July 2020 (diff | hist) CONVERGE FAQ (Undo revision 25226 by Ywang89 (talk))
- 21:56, 14 July 2020 (diff | hist) CONVERGE FAQ
- 21:54, 14 July 2020 (diff | hist) CONVERGE FAQ
- 21:52, 14 July 2020 (diff | hist) CONVERGE FAQ
- 22:38, 6 March 2018 (diff | hist) CONVERGE FAQ (→Wall Heat Transfer)
- 22:38, 6 March 2018 (diff | hist) CONVERGE FAQ (→Spray)
- 22:37, 6 March 2018 (diff | hist) CONVERGE FAQ (→Combustion and Emissions)
- 22:34, 6 March 2018 (diff | hist) CONVERGE FAQ (→Computational Speed and Load Balancing)
- 22:31, 6 March 2018 (diff | hist) CONVERGE FAQ (→General)
- 22:30, 6 March 2018 (diff | hist) CONVERGE FAQ (→Installing and running CONVERGE)
- 22:29, 6 March 2018 (diff | hist) CONVERGE FAQ (→General)
- 21:20, 6 March 2018 (diff | hist) CONVERGE FAQ (→Combustion)
- 20:10, 13 December 2017 (diff | hist) CONVERGE FAQ (→Are there any guidelines on the number of parcels relative to the injected mass?)
- 20:08, 13 December 2017 (diff | hist) CONVERGE FAQ
- 14:11, 13 December 2017 (diff | hist) CONVERGE FAQ (→I ran two simulations with identical settings expect that one simulation was initialized via mapping. Why are the results from these two simulations not the same?)
- 22:36, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:35, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:34, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:34, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:33, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:31, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:31, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:30, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:30, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:29, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:28, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:28, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:27, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:26, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:25, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 22:22, 12 December 2017 (diff | hist) CONVERGE FAQ (→How are the blobs initialized when the Injection drop distribution is based only on nozzle size and the discharge coefficient model uses a varying nozzle velocity coefficient?)
- 20:49, 8 December 2017 (diff | hist) CONVERGE FAQ
- 20:48, 8 December 2017 (diff | hist) CONVERGE FAQ (→My RANS simulation shows cycle-to-cycle variation. Is this variation to be expected?)
- 20:43, 8 December 2017 (diff | hist) CONVERGE FAQ (→My RANS simulation shows cycle-to-cycle variation. Is this variation to be expected?)
- 20:27, 8 December 2017 (diff | hist) CONVERGE FAQ
- 20:26, 8 December 2017 (diff | hist) CONVERGE FAQ
- 20:24, 8 December 2017 (diff | hist) CONVERGE FAQ
- 20:22, 8 December 2017 (diff | hist) CONVERGE FAQ
- 19:42, 8 December 2017 (diff | hist) CONVERGE FAQ (→How can I check the status of my simulation?)
- 19:41, 8 December 2017 (diff | hist) CONVERGE FAQ (→10. What CONVERGE quantity can be compared against measured mass flow rate data at the intake port?)
- 19:39, 8 December 2017 (diff | hist) CONVERGE FAQ (→My RANS simulation shows cycle-to-cycle variation. Is this variation to be expected?)
- 19:35, 8 December 2017 (diff | hist) CONVERGE FAQ (→Spray)
- 19:30, 8 December 2017 (diff | hist) CONVERGE FAQ (→Combustion)
- 19:28, 8 December 2017 (diff | hist) CONVERGE FAQ (→Computational Speed and Load Balancing)
- 19:27, 8 December 2017 (diff | hist) CONVERGE FAQ (→General)
- 19:25, 8 December 2017 (diff | hist) CONVERGE FAQ (→General)
- 19:24, 8 December 2017 (diff | hist) CONVERGE FAQ (→Computational Speed and Load Balancing)
- 19:16, 8 December 2017 (diff | hist) CONVERGE FAQ (→Spray)
- 19:13, 8 December 2017 (diff | hist) CONVERGE FAQ (→Combustion)
- 19:13, 8 December 2017 (diff | hist) CONVERGE FAQ (→Computational Speed and Load Balancing)
- 19:12, 8 December 2017 (diff | hist) CONVERGE FAQ (→Internal Combustion Engine FAQs)
- 19:09, 8 December 2017 (diff | hist) CONVERGE FAQ (→Combustion)
- 19:09, 8 December 2017 (diff | hist) CONVERGE FAQ (→1. There is burning in the intake port in my G-Equation simulation. Why?)
- 19:04, 8 December 2017 (diff | hist) CONVERGE FAQ (→7. Will the triangle count in my CAD file affect my simulation’s runtime?)
- 19:00, 8 December 2017 (diff | hist) CONVERGE FAQ (→Combustion)
- 18:58, 8 December 2017 (diff | hist) CONVERGE FAQ (→1. My simulation runs slowly. How can I identify the cause?)
- 18:56, 8 December 2017 (diff | hist) CONVERGE FAQ (→Computational Speed and Load Balancing)
- 18:54, 8 December 2017 (diff | hist) CONVERGE FAQ (→General=)
- 18:52, 8 December 2017 (diff | hist) CONVERGE FAQ (→Internal Combustion Engine FAQs)
- 18:51, 8 December 2017 (diff | hist) CONVERGE FAQ
- 18:33, 8 December 2017 (diff | hist) CONVERGE FAQ (Internal Combustion Engine FAQs)
- 18:25, 8 December 2017 (diff | hist) N CONVERGE FAQ (Created page with "Internal Combustion Engine FAQs We hope you find the following FAQs helpful. For more information about many of the topics listed here, please review the CONVERGE documentation a...")
- 18:24, 8 December 2017 (diff | hist) FAQ's (→Commercial codes)
- 18:23, 8 December 2017 (diff | hist) FAQ's (→Commercial codes)