CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Out array 1.f90

Out array 1.f90

From CFD-Wiki

Revision as of 02:26, 19 September 2005 by Michail (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Subroutine Output_all

include 'icomm_1.f90'

Dimension X_inlet(nx), &

T_inlet(nx), &

  			X_outlet(nx),  &

T_outlet(nx)


!--------------------------------------------------------------------------

!--------------------------------------------------------------------------

!--------------------------------------------------------------------------

open (22,file='GRID_p.dat')

WRITE(22,*)'VARIABLES = "X", "Y" '


     WRITE (22,*)' ZONE I=' ,NXmax, ', J=', NYmax, ', F=POINT'

DO 1 J=1, NYmax

DO 1 I=1, NXmax

WRITE (22,*) X(I,J), Y(I,J)

 1     continue 	


close(22)

!--------------------------------------------------------------------------

open (23,file='GRID_pp.dat')

WRITE(23,*)'VARIABLES = "Xp", "Yp" '

     WRITE (23,*)' ZONE I=' ,NXmaxP, ', J=', NYmaxP, ', F=POINT'

DO 2 J=1, NYmaxP

DO 2 I=1, NXmaxP

WRITE (23,*) Xp(I,J), Yp(I,J)

 2     continue 	

close(23)

!--------------------------------------------------------------------------

open (23,file='Domain_all.dat')

WRITE(23,*)'VARIABLES = "Xp", "Yp" , "Up" , "Vp" , "Tp" '

     WRITE (23,*)' ZONE I=' ,NXmaxP, ', J=', NYmaxP, ', F=POINT'

DO 4 J=1, NYmaxP

DO 4 I=1, NXmaxP

WRITE (23,*) Xp(I,J), Yp(I,J) , F(i,j,1) , F(i,j,2) , F(i,j,5)

 4     continue 	

close(23)

!--------------------------------------------------------------------------

!--------------------------------------------------------------------------

!--------------------------------------------------------------------------

!--------------------------------------------------------------------------


DO 6 I=1, NXmaxP

if (Xp(i,1)<0.) then

T_inlet(I) = F(i,1,5)

X_inlet(I) = Xp(i,1)

Ibeg_inlet = 1

Iend_inlet = I

end if

if (Xp(i,1)>0.) then

I_outlet = I - Iend_inlet

T_outlet(I_outlet) = F(i,1,5)

X_outlet(I_outlet) = Xp(i,1)

Ibeg_outlet = Iend_inlet + 1

Iend_outlet = I_outlet

end if

 6     continue 	

!--------------------------------------------------------------------------

open (23,file='Profiles.dat')

 WRITE(23,*)'VARIABLES = "Xp", "Tp"  ' 

WRITE (23,*) 'ZONE I=', Iend_inlet, ', F=POINT'

DO 12 I=Iend_inlet,1,-1

12 WRITE (23,*) -1.* X_inlet(I),T_inlet(I)

WRITE (23,*) 'ZONE I=', Iend_outlet, ', F=POINT'

DO 11 I=1,Iend_outlet

11 WRITE (23,*) X_outlet(I),T_outlet(I)

close(23)

!--------------------------------------------------------------------------

Return

End

My wiki