Dissimilar fluids for two separate inlets in compressible flow modeling

Zahid123 · August 30, 2022, 13:38

Dear SU2 experts,
I am currently using the NEMO_NAVIER_STOKES solver to simulate compressible flow. In my model, I have two separate inlets. In one inlet, I have to assign a gas composition (N2:0.77,O2:0.23). The another inlet will have a gas composition (N2:1.0). Currently, I am assuming the inlets as farfield instead of supersonic inlets, as farfield is the only marker option Nemo is accepting in the version 7.3.1.

Would you be kind to advise me the way to assign dissimilar gas compositions for different inlets, to be specific for the compressible nonequilibrium flow modeling (FLUID_MODEL= SU2_NONEQ) in SU2 Nemo! If it is possible, is there any relevant SU2 tutorial I could follow?

Another question, is it possible to assign a permeable boundary in SU2 solver?

Thanks for your time. I appreciate.

Best regards,
Zahid

wallym · September 1, 2022, 13:04

Hi Zahid,

I am one of the developer of NEMO. Unfortunately, we do not have the capability implemented yet. I have played around with a bit, but haven't had time dedicate the issue.

Wally

August 30, 2022, 13:38	Dissimilar fluids for two separate inlets in compressible flow modeling	#1
Zahid123 New Member Md.Zahid Hasan Join Date: Aug 2022 Posts: 3 Rep Power: 4	Dear SU2 experts, I am currently using the NEMO_NAVIER_STOKES solver to simulate compressible flow. In my model, I have two separate inlets. In one inlet, I have to assign a gas composition (N2:0.77,O2:0.23). The another inlet will have a gas composition (N2:1.0). Currently, I am assuming the inlets as farfield instead of supersonic inlets, as farfield is the only marker option Nemo is accepting in the version 7.3.1. Would you be kind to advise me the way to assign dissimilar gas compositions for different inlets, to be specific for the compressible nonequilibrium flow modeling (FLUID_MODEL= SU2_NONEQ) in SU2 Nemo! If it is possible, is there any relevant SU2 tutorial I could follow? Another question, is it possible to assign a permeable boundary in SU2 solver? Thanks for your time. I appreciate. Best regards, Zahid

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2 inlets with a different gas in each = a multiphase flow solver ?	adrieno	OpenFOAM Running, Solving & CFD	2	April 5, 2016 06:00
Compressible de Laval Nozzle Flow	rw511	CFX	3	May 22, 2011 20:48
compressible flow	maria teresa	FLUENT	1	September 7, 2007 17:58
fluid flow fundas	ram	Main CFD Forum	5	June 17, 2000 22:31
Hydrostatic pressure in 2-phase flow modeling (long)	DS & HB	Main CFD Forum	0	January 8, 2000 16:00

September 1, 2022, 13:04		#2
wallym Senior Member Wally Maier Join Date: Apr 2019 Posts: 123 Rep Power: 7	Hi Zahid, I am one of the developer of NEMO. Unfortunately, we do not have the capability implemented yet. I have played around with a bit, but haven't had time dedicate the issue. Wally