Very high y+ values on my solution. -- CFD Online Discussion Forums

November 9, 2020, 07:39	Very high y+ values on my solution.	#1
aerojoe New Member Join Date: Apr 2018 Posts: 3 Rep Power: 8	Hello all, I’ve been trying to get a flow solution around my 3D geometry in around 0.15 Mach. Even though my grid resolution is good enough to get y+ < 1 , I’m getting very high y+ values in some parts especially on corners. I’m using sst k-w turbulence model and having difficulties in convergence, specifically in omega residual. Anybody ever has a similar problem? Any suggestion to improve my solution is appreciated. Have a nice day.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2way FSi, Initialize with steady solution, Fluent, Transient Sturcural, System Coupli	mmkkeshavarzi	FLUENT	1	June 28, 2024 08:03
SU2 7.0.7 Built on CentOS 7, parallel computation pyscript mpi exit error?	EternalSeekerX	SU2	3	October 9, 2020 19:28
Too high values of temperature, pressure and velocity	valahian1	FLUENT	1	July 1, 2015 04:53
Natural Frequency Values from Analytical and Numerical Solution are different	ppy1111	ANSYS	0	July 16, 2014 21:23
Reference Values for Air-Foils with high Angle-of-Attack?	hornig	FLUENT	0	January 9, 2010 12:11

All times are GMT -4. The time now is 13:11.