|
[Sponsors] |
February 8, 2018, 05:48 |
Enabling body forces (gravity)
|
#1 |
New Member
Join Date: Jun 2012
Posts: 19
Rep Power: 14 |
Hi everyone,
is it possible to enable body forces (i.e. gravity) in SU2v4 or v5? I went through config_template.cfg but I couldn't find any flag for it. The Chalmers Master thesis "Benchmark and validation of Open Source CFD codes, with focus on compressible and rotating capabilities, for integration on the SimScale platform" (http://publications.lib.chalmers.se/...965/198965.pdf) states in section 2.3.1 that : "The source term Q can contain a gravity term, with g = 9.81 if the user chooses so. The gravity term can at this point (SU2 version 2.0.8) only be chosen in the z-direction in 3D-calculations or y-direction for 2D-calculations" Thanks a lot, Alberto |
|
February 21, 2018, 10:42 |
|
#2 |
New Member
Join Date: Jun 2012
Posts: 19
Rep Power: 14 |
I just noticed that such feature is implemented in SU2 v6.0, nice one!
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
body forces, moving mesh | researcher | Main CFD Forum | 0 | March 26, 2016 01:15 |
moving mesh body forces | researcher | Main CFD Forum | 0 | November 8, 2015 09:48 |
Forces on spherical body | Wen Long | Main CFD Forum | 0 | June 29, 2002 21:21 |
Valve Forces in CFdesign | Mike Clapp | Main CFD Forum | 3 | March 8, 2001 14:09 |
Body Forces | Thomas P. Abraham | Main CFD Forum | 1 | April 21, 1999 21:24 |