Supersonic boundary layer test data

akshaydeshpande · April 18, 2016, 17:12

Hi all,

I am running SU2 for supersonic ( 2 < M < 5) laminar and turbulent boundary layer and want to validate my setup and results.
Are there any documented test cases for supersonic boundary layer in SU2?

Thank you.

fpalacios · April 22, 2016, 03:06

Hi,
As far I know, there is not a documented test for supersonic boundary layer.
My recommendation is to look at http://turbmodels.larc.nasa.gov
If you work on this it would be great if you could write a tutorial like

https://github.com/su2code/SU2/wiki/User-Tutorials

Thanks for you interest in SU2,

Best Regards,
Francisco Palacios

April 18, 2016, 17:12	Supersonic boundary layer test data	#1
akshaydeshpande New Member Akshay Deshpande Join Date: Sep 2014 Posts: 19 Rep Power: 12	Hi all, I am running SU2 for supersonic ( 2 < M < 5) laminar and turbulent boundary layer and want to validate my setup and results. Are there any documented test cases for supersonic boundary layer in SU2? Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem in setting Boundary Condition	Madhatter92	CFX	12	January 12, 2016 05:39
Radiation interface	hinca	CFX	15	January 26, 2014 18:11
Turbulent Boundary Layer on a Flat Plate	Hoshang Garda	FLUENT	1	November 27, 2013 11:24
[snappyHexMesh] Boundary layer in a pipe	Clementhuon	OpenFOAM Meshing & Mesh Conversion	6	March 12, 2012 13:41
A question on "Specifying Boundary Layer Deformation Smoothing"	didiean	FLUENT	2	January 16, 2012 22:39

April 22, 2016, 03:06		#2
fpalacios Super Moderator Francisco Palacios Join Date: Jan 2013 Location: Long Beach, CA Posts: 404 Rep Power: 15	Hi, As far I know, there is not a documented test for supersonic boundary layer. My recommendation is to look at http://turbmodels.larc.nasa.gov If you work on this it would be great if you could write a tutorial like https://github.com/su2code/SU2/wiki/User-Tutorials Thanks for you interest in SU2, Best Regards, Francisco Palacios