SU2 optimization does not work correctly with CGNS format

Andrei · April 21, 2016, 09:40

SU2 optimization does not work correctly with CGNS format

Direct computation with CGNS format work correctly.

First step of optimization is correct (DSN_001).
On second step (DSN_002) the program write the mesh_airfoil_deform.cgns.
The extension is correct, but internal format is SU2 format.
The command CONVERT_TO_SU2= YES does not work also.

May be I do not know something.

Help me!

MESH_FILENAME= mesh_airfoil.cgns
MESH_FORMAT= CGNS
%CGNS_TO_SU2= YES
MESH_OUT_FILENAME= mesh_out.cgns or MESH_OUT_FILENAME= mesh_out.su2

talbring · April 22, 2016, 11:35

This issue was resolved here:
https://github.com/su2code/SU2/issues/270

April 21, 2016, 09:40	SU2 optimization does not work correctly with CGNS format	#1
Andrei New Member Andrei Join Date: Apr 2016 Posts: 2 Rep Power: 0	SU2 optimization does not work correctly with CGNS format Direct computation with CGNS format work correctly. First step of optimization is correct (DSN_001). On second step (DSN_002) the program write the mesh_airfoil_deform.cgns. The extension is correct, but internal format is SU2 format. The command CONVERT_TO_SU2= YES does not work also. May be I do not know something. Help me! MESH_FILENAME= mesh_airfoil.cgns MESH_FORMAT= CGNS %CGNS_TO_SU2= YES MESH_OUT_FILENAME= mesh_out.cgns or MESH_OUT_FILENAME= mesh_out.su2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CGNS to SU2 - Element Type Not Supported	skarthik	SU2	6	October 27, 2020 04:24
bscw cgns wing	kocjH	SU2	3	May 16, 2017 03:56
Compiling with CGNS Support	granbycools	SU2 Installation	6	March 31, 2014 07:52
[snappyHexMesh] snappyHexMesh utility does not work correctly	sandy13	OpenFOAM Meshing & Mesh Conversion	7	April 2, 2013 18:16
Optimization Work	John	FLUENT	2	December 18, 2008 13:19

April 22, 2016, 11:35		#2
talbring Super Moderator Tim Albring Join Date: Sep 2015 Posts: 195 Rep Power: 11	This issue was resolved here: https://github.com/su2code/SU2/issues/270