Installing SU2 5.0.0 with lubuntu - tecio not found

quarkz · February 15, 2017, 21:02

Hi,

I'm trying to install SU2 5.0.0 with lubuntu. Everything was ok except that tecio support is not there.

May I know what must I install to get tecio to work?

Thanks!

Jiba · February 16, 2017, 04:48

Hi,

you need Tecplot for the tecio

Regards

quarkz · February 17, 2017, 02:16

Ok, thanks Jiba. It seems that I can still get output in tecplot, in ASCII format that is.

talbring · February 28, 2017, 07:01

Hi,

tecio is shipped with SU2. So Binary tecplot output should work out of the box.

Tim

quarkz · March 2, 2017, 00:01

I got the error msg:

configure: WARNING: X11/Intrinsic.h: present but cannot be compiled
configure: WARNING: X11/Intrinsic.h: check for missing prerequisite headers?
configure: WARNING: X11/Intrinsic.h: see the Autoconf documentation
configure: WARNING: X11/Intrinsic.h: section "Present But Cannot Be Compiled"
configure: WARNING: X11/Intrinsic.h: proceeding with the compiler's result
configure: WARNING: ## --------------------------------------------- ##
configure: WARNING: ## Report this to su2code-dev@lists.stanford.edu ##
configure: WARNING: ## --------------------------------------------- ##
checking for X11/Intrinsic.h... no

and in the end tecio support is "no"

February 15, 2017, 21:02	Installing SU2 5.0.0 with lubuntu - tecio not found	#1
quarkz Senior Member TWB Join Date: Mar 2009 Posts: 414 Rep Power: 19	Hi, I'm trying to install SU2 5.0.0 with lubuntu. Everything was ok except that tecio support is not there. May I know what must I install to get tecio to work? Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
error in fireFoam, when running the case wallFireSpread2D	zhoubiao1088	OpenFOAM Running, Solving & CFD	9	February 1, 2018 19:45
Problem of compilation OF 14Allwmake command not found	erik_d	OpenFOAM Bugs	13	September 13, 2008 22:45
Regarding FoamX running Kindly help out	hariya03	OpenFOAM Pre-Processing	0	April 18, 2008 05:26
Problem with rhoSimpleFoam	matteo_gautero	OpenFOAM Running, Solving & CFD	0	February 28, 2008 07:51
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 05:15

February 16, 2017, 04:48		#2
Jiba New Member Join Date: Dec 2013 Location: Italy Posts: 29 Rep Power: 13	Hi, you need Tecplot for the tecio Regards

February 17, 2017, 02:16		#3
quarkz Senior Member TWB Join Date: Mar 2009 Posts: 414 Rep Power: 19	Ok, thanks Jiba. It seems that I can still get output in tecplot, in ASCII format that is.

February 28, 2017, 07:01		#4
talbring Super Moderator Tim Albring Join Date: Sep 2015 Posts: 195 Rep Power: 11	Hi, tecio is shipped with SU2. So Binary tecplot output should work out of the box. Tim

March 2, 2017, 00:01		#5
quarkz Senior Member TWB Join Date: Mar 2009 Posts: 414 Rep Power: 19	I got the error msg: configure: WARNING: X11/Intrinsic.h: present but cannot be compiled configure: WARNING: X11/Intrinsic.h: check for missing prerequisite headers? configure: WARNING: X11/Intrinsic.h: see the Autoconf documentation configure: WARNING: X11/Intrinsic.h: section "Present But Cannot Be Compiled" configure: WARNING: X11/Intrinsic.h: proceeding with the compiler's result configure: WARNING: ## --------------------------------------------- ## configure: WARNING: ## Report this to su2code-dev@lists.stanford.edu ## configure: WARNING: ## --------------------------------------------- ## checking for X11/Intrinsic.h... no and in the end tecio support is "no"