Rubber pipe squeeze

vardhanbarve · July 15, 2018, 17:46

Hello, in my problem i have a rubber pipe which is lying on ground and pressure is applied uniformly on the pipe surface via foot , the pipe is enclosed at both ends via plug and contains water .

Is it possible on ansys workbench 18.2 to simulate this problem and get pressure and stress on the plug surface ? If yes then how ? I have been trying this via fluid solid interaction on ansys but unable to do it

karachun · July 17, 2018, 13:28

Use acoustic elements.
https://www.eng-tips.com/viewthread.cfm?qid=440568

July 15, 2018, 17:46	Rubber pipe squeeze	#1
vardhanbarve New Member Vardhan Barve Join Date: Jul 2018 Posts: 2 Rep Power: 0	Hello, in my problem i have a rubber pipe which is lying on ground and pressure is applied uniformly on the pipe surface via foot , the pipe is enclosed at both ends via plug and contains water . Is it possible on ansys workbench 18.2 to simulate this problem and get pressure and stress on the plug surface ? If yes then how ? I have been trying this via fluid solid interaction on ansys but unable to do it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[DesignModeler] DesignModeler Pipe within pipe	shields	ANSYS Meshing & Geometry	13	November 25, 2018 23:14
need help about double pipe heat exchanger with chtMultiRegionSimpleFoam	wuyangzhen	OpenFOAM	10	December 12, 2017 01:19
Double Walled Pipe Boundary	dahvqaz	FLUENT	2	December 5, 2012 11:14
Terrible Mistake In Fluid Dynamics History	Abhi	Main CFD Forum	12	July 8, 2002 10:11
fluid flow fundas	ram	Main CFD Forum	5	June 17, 2000 22:31

July 17, 2018, 13:28		#2
karachun Senior Member Join Date: Nov 2015 Posts: 246 Rep Power: 12	Use acoustic elements. https://www.eng-tips.com/viewthread.cfm?qid=440568