ANSYS Mechanical problem

prince_mech · April 8, 2017, 02:57

after completing a proper hex dominant mesh a run a simulation but after approx. 20 min it shows error saying that 'during the simulation the elapsed time....' can anyone could help me to solve this error.
Thanks in advance

Gweher · April 10, 2017, 04:27

It's not an error but just a warning. The message is quite straight forward and self-explanatory. Either you’re running your simulation on a slow hard drive or RAM related causing a “bottleneck” of performance. You can greatly speed up the simulation by using a SSD for instance; you can refer to the performance guide in the help menu.

prince_mech · April 12, 2017, 03:18

Thanks a lot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Workbench] ANSYS Workbench CAD Interface for CATIA problem	NHeidfeld	ANSYS Meshing & Geometry	6	September 18, 2016 13:52
Can you help me with a problem in ansys static structural solver?	sourabh.porwal	Structural Mechanics	0	March 27, 2016 18:07
Problem in temperature distribution in Ansys Fluent	ALI Riaz	FLUENT	0	March 6, 2016 14:05
Problem with an old Simulation	FrankW	CFX	3	February 8, 2016 05:28
Problem importing ANSYS mesh, please help	Ankan Kumar	FLUENT	1	February 2, 2003 09:38

April 10, 2017, 04:27		#2
Gweher Senior Member Gwenael H. Join Date: Mar 2011 Location: Switzerland Posts: 392 Rep Power: 20	It's not an error but just a warning. The message is quite straight forward and self-explanatory. Either you’re running your simulation on a slow hard drive or RAM related causing a “bottleneck” of performance. You can greatly speed up the simulation by using a SSD for instance; you can refer to the performance guide in the help menu.

April 12, 2017, 03:18		#3
prince_mech Member Prince Hossain Join Date: Feb 2017 Posts: 32 Rep Power: 9	Thanks a lot