Essential parameter/properties masonry structure modelling (ABAQUS)

raimy haidar · February 17, 2015, 19:23

hai, im haidar (undergraduate-civil engineering from Malaysia)

Kindly please help me,

currently im working on my thesis which majorly focused on the dynamic analysis of masonry (Concrete Masonry Unit) multistorey building structure,

presently, im modelling the 3 story building (including ground floor) of masonry building with block size of (200x400mm) including 10mm thickness of mortar joint

(macro-modelling) using the ABAQUS program. However, im facing few issues and confusion regarding on masonry modelling:

1.is there any specific parameter/properties of interaction between the masonry blocks ?

2. what is the exact properties of masonry blocks need to be input in the ABAQUS program ( ex: young modulus....etc) ?

3. is there any specific guidance/tutorial regarding on macro modelling of masonry structure ?

*hereby i attached the minor part of my task

Beunhaas · July 1, 2015, 06:50

Dear Haidar,

I'm wondering whether you've already gained more information concerning the questions you posted in this thread. I would like to model a structure that's looking a bit like yours.

Kind Regards.

February 17, 2015, 19:23	Essential parameter/properties masonry structure modelling (ABAQUS)	#1
raimy haidar New Member Raimy haidar Join Date: Feb 2015 Location: MALAYSIA Posts: 1 Rep Power: 0	hai, im haidar (undergraduate-civil engineering from Malaysia) Kindly please help me, currently im working on my thesis which majorly focused on the dynamic analysis of masonry (Concrete Masonry Unit) multistorey building structure, presently, im modelling the 3 story building (including ground floor) of masonry building with block size of (200x400mm) including 10mm thickness of mortar joint (macro-modelling) using the ABAQUS program. However, im facing few issues and confusion regarding on masonry modelling: 1.is there any specific parameter/properties of interaction between the masonry blocks ? 2. what is the exact properties of masonry blocks need to be input in the ABAQUS program ( ex: young modulus....etc) ? 3. is there any specific guidance/tutorial regarding on macro modelling of masonry structure ? *hereby i attached the minor part of my task

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modelling hydraulic structure in OpenFoam	mukesh499405	OpenFOAM	0	April 16, 2013 07:08
Modelling wave impacts on offshore simple structure	hugh	OpenFOAM Pre-Processing	5	May 7, 2012 04:49
Thermal modelling of a ship structure using ANSYS	chetanladha	ANSYS	2	April 14, 2011 16:25
How to do thermal and flow modelling in honeycomb structure	senCFX	Main CFD Forum	0	January 25, 2011 17:07
MOdelling a 3-D structure of a fan blade using NACA airfoils	ashu.feb28	Main CFD Forum	0	February 2, 2010 11:19

July 1, 2015, 06:50		#2
Beunhaas New Member De Vries Join Date: Jul 2015 Posts: 1 Rep Power: 0	Dear Haidar, I'm wondering whether you've already gained more information concerning the questions you posted in this thread. I would like to model a structure that's looking a bit like yours. Kind Regards.