Static structural Analysis using temperature profile from CFX transient solution

bhavik139 · June 26, 2013, 20:36

Hello Everyone,
I did transient thermal solution using Ansys CFX module , now I want to perform static structural using the final temperature . i want to input the results of the CFX as thermal loading for Static structural. Moreover I want to do a transient structural analysis so looking for some help regarding the problem .

ace37 · June 26, 2013, 21:42

This isn't a good answer, but an older colleague of mine had a frustrating time getting CFX working for a low-criticality FSI application. He ended up just taking a contour plot and manually applying loads to the structure. That often won't be easy or accurate enough, but it was pretty straightforward and worked well enough in his case.

bhavik139 · June 28, 2013, 00:24

Thanks Ace, But can anyone give me a more clear solution.

albin91 · July 7, 2013, 21:51

Hello everyone .. i want to ask ,, what is in mechanical workbench ,, output thermal exapansion or thermal stress ,, please answe

June 26, 2013, 20:36	Static structural Analysis using temperature profile from CFX transient solution	#1
bhavik139 New Member Bhavik Join Date: Apr 2012 Location: Arlington, TX Posts: 14 Rep Power: 14	Hello Everyone, I did transient thermal solution using Ansys CFX module , now I want to perform static structural using the final temperature . i want to input the results of the CFX as thermal loading for Static structural. Moreover I want to do a transient structural analysis so looking for some help regarding the problem .

July 7, 2013, 21:51	confused	#4
albin91 New Member albinoorat Join Date: Jul 2013 Posts: 4 Rep Power: 13	Hello everyone .. i want to ask ,, what is in mechanical workbench ,, output thermal exapansion or thermal stress ,, please answe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cfd to ansys thermal to ansys structural interface	ssixr	ANSYS	17	July 31, 2015 16:18
Transient CFX and transient structural problem	jurij	CFX	1	November 12, 2012 09:51
Eigenfrequencies static and modal analysis	Laura_mecheng	ANSYS	1	May 15, 2012 04:40
IcoFoam parallel woes	msrinath80	OpenFOAM Running, Solving & CFD	9	July 22, 2007 03:58
transient analysis of silencer using cfx.	mehul	CFX	0	October 16, 2005 05:48

June 26, 2013, 21:42		#2
ace37 New Member John Join Date: Jun 2013 Posts: 2 Rep Power: 0	This isn't a good answer, but an older colleague of mine had a frustrating time getting CFX working for a low-criticality FSI application. He ended up just taking a contour plot and manually applying loads to the structure. That often won't be easy or accurate enough, but it was pretty straightforward and worked well enough in his case.

June 28, 2013, 00:24		#3
bhavik139 New Member Bhavik Join Date: Apr 2012 Location: Arlington, TX Posts: 14 Rep Power: 14	Thanks Ace, But can anyone give me a more clear solution.