Problem proSTAR Tutorial 9.2 (3-Step EDBR Propane Combustion) -- CFD Online Discussion Forums

August 6, 2015, 08:25	Problem proSTAR Tutorial 9.2 (3-Step EDBR Propane Combustion)	#1
mesa New Member Join Date: Sep 2012 Posts: 5 Rep Power: 14	Hi, I recognized that problem case in the prostar CFD/CCM tutorial 9.2 (propane combustion with three-step EDBR) ignites as soon as the simulation starts and not after the defined iteration steps. I can't find any wrong value I may have entered in the initial setup. Can somebody help me? I've attached the values in the monitoring cell which is also part of the ignition cells. Ignition is supposed to start at iteration step 50 and end after iteration step 150.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Extrusion with OpenFoam problem No. Iterations 0	Lord Kelvin	OpenFOAM Running, Solving & CFD	8	March 28, 2016 12:08
1-way time step problem in doing FSI between Fluent and Transient Structural	sihaqqi	ANSYS	0	November 21, 2013 03:45
Combustion in a Back ward facing step	Mina_Shahi	CFX	4	July 19, 2011 06:37
Time step sizing for 3D sliding mesh problem	happyman	Main CFD Forum	0	July 1, 2011 10:19
combustion problem	mcnair	CFX	0	March 28, 2011 00:42

All times are GMT -4. The time now is 22:13.