 |
 |
 |
|
|
|
[Sponsors] | ||||
coupling Star CCM+ with Abaqus for FSI problems |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 3, 2010, 09:00
|
coupling Star CCM+ with Abaqus for FSI problems
|
#1 |
|
New Member
joy
Join Date: Nov 2009
Posts: 4
Rep Power: 17  |
I am solving for a thermal fatigue failure in an Exhaust manifold and i wanted to export my transient data into abaqus for each time step. Is there any possibitly of mapping transient data to abaqus at every time step.
Secondly i wanted to store my solution data for a duration of time in CCM+ (like *.pstt file in Star CD). is this option available in Star CCM+ Thanks in Advance |
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 05:04 |
| [Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 05:38 |
| error in star ccm | maurizio | Siemens | 3 | October 16, 2007 06:17 |
| [Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |
| Some problems with Star CD | Micha | Siemens | 0 | August 6, 2003 14:55 |
Linear Mode
