Mesh information

pradeap · June 28, 2010, 05:41

How to get the mesh information after generating volume mesh in star ccm+, like number of point elements, vertices, coordinates, edges, faces, volumes.

i need to use this information for my code.

olauer · June 28, 2010, 10:57

Representations -> Volume Mesh (Properties)

pradeap · June 29, 2010, 11:13

Hi
I am looking for the information for each and every node point.

e.g : node 1 is connected to which other nodes and so on

olauer · June 30, 2010, 10:38

Hmm, I do not know how open is the ccm specification.

On the other hand there is a program called ccm26ToFoam in the OpenFoam package. Perhaps you can use some of this code to analyse your model in the direction you need.

I never needed such detailed dependencies and informations.

Good luck

June 28, 2010, 05:41	Mesh information	#1
pradeap New Member kumar Join Date: Jun 2010 Posts: 20 Rep Power: 16	How to get the mesh information after generating volume mesh in star ccm+, like number of point elements, vertices, coordinates, edges, faces, volumes. i need to use this information for my code.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] vtk mesh or Abaqus mesh to OpenFOAM	bigphil	OpenFOAM Meshing & Mesh Conversion	27	November 23, 2015 18:31
[Salome] unv mesh corrupted after createPatch	maddalena	OpenFOAM Meshing & Mesh Conversion	1	February 18, 2010 08:43
getting face information from the adapted mesh	Ertan	FLUENT	0	January 15, 2008 12:19
The mesh information in FLUENT	Summer	FLUENT	0	January 7, 2008 10:11
basic of mesh refinement	arya	CFX	4	June 19, 2007 13:21

June 28, 2010, 10:57		#2
olauer Member Oliver Lauer Join Date: Mar 2009 Location: Coburg Posts: 57 Rep Power: 17	Representations -> Volume Mesh (Properties)

June 29, 2010, 11:13		#3
pradeap New Member kumar Join Date: Jun 2010 Posts: 20 Rep Power: 16	Hi I am looking for the information for each and every node point. e.g : node 1 is connected to which other nodes and so on

June 30, 2010, 10:38		#4
olauer Member Oliver Lauer Join Date: Mar 2009 Location: Coburg Posts: 57 Rep Power: 17	Hmm, I do not know how open is the ccm specification. On the other hand there is a program called ccm26ToFoam in the OpenFoam package. Perhaps you can use some of this code to analyse your model in the direction you need. I never needed such detailed dependencies and informations. Good luck