Trouble with Roughness Height

Dragin · June 13, 2009, 14:05

Hello,

I'm a relatively new user of STAR-CCM+ V4 and wish to simulate the roughness height within the atmospheric boundary layer. The goal is to create homogeneity of the velocity/TKE profiles as best as possible. Unfortunately, the node for "roughness height" as stated in the manual does not show up even though the wall surface specification is set as "rough". Strangely, the Wall Roughness Parameters node does appear. What may be the problem?

Thanks,
Kevin

Zolet · June 17, 2009, 17:32

Donwload the new version 4.02.011. This issue was fixed.

June 13, 2009, 14:05	Trouble with Roughness Height	#1
Dragin New Member Kevin Join Date: Jun 2009 Posts: 1 Rep Power: 0	Hello, I'm a relatively new user of STAR-CCM+ V4 and wish to simulate the roughness height within the atmospheric boundary layer. The goal is to create homogeneity of the velocity/TKE profiles as best as possible. Unfortunately, the node for "roughness height" as stated in the manual does not show up even though the wall surface specification is set as "rough". Strangely, the Wall Roughness Parameters node does appear. What may be the problem? Thanks, Kevin

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Setting of Roughness Constant and Height	Sing	FLUENT	7	June 23, 2021 15:26
UDF: for the setting of roughness height	maximus	FLUENT	1	September 10, 2014 17:20
Roughness Height	Bregazzi	FLUENT	1	February 19, 2009 07:03
atmospheric roughness height	Alain BASTIDE	Siemens	5	December 30, 2002 06:26
atmospheric roughness height	Alain BASTIDE	Main CFD Forum	0	December 27, 2002 17:32

June 17, 2009, 17:32		#2
Zolet New Member Thiago Luis Zolet Join Date: Mar 2009 Posts: 5 Rep Power: 17	Donwload the new version 4.02.011. This issue was fixed.