Macro in Star CCM+

Francoiss · July 24, 2022, 13:37

Hi everyone, I have to start the simulation directly from my pc using a macro, which will be launched simultaneously on another calculation station. Unfortunately I don't know the java basics to do this; I have consulted the star guide but it is insufficient. Could you give me some advice on how to launch it or where to learn the basics?
Thank you.

LuckyTran · July 25, 2022, 04:50

Use the record macro and it generates the script for you, replicating exactly all the actions you've taken.

The first macro you want to make is probably one that changes the stopping criteria, presses the run button, and then saves the sim file when the calculation is done.

July 24, 2022, 13:37	Macro in Star CCM+	#1
Francoiss New Member Francesco Join Date: Jan 2022 Location: Italia Posts: 4 Rep Power: 4	Hi everyone, I have to start the simulation directly from my pc using a macro, which will be launched simultaneously on another calculation station. Unfortunately I don't know the java basics to do this; I have consulted the star guide but it is insufficient. Could you give me some advice on how to launch it or where to learn the basics? Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chemkin Reader for 9 polynomial coefficient CEA	sanjeev_adhikari	OpenFOAM Running, Solving & CFD	0	January 6, 2021 21:37
problem when imported geometry from 3D CAD to star ccm,	TAREK GANAT	STAR-CCM+	1	May 21, 2013 23:15
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 05:04
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 05:38
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 05:15

July 25, 2022, 04:50		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,762 Rep Power: 66	Use the record macro and it generates the script for you, replicating exactly all the actions you've taken. The first macro you want to make is probably one that changes the stopping criteria, presses the run button, and then saves the sim file when the calculation is done.