|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
mad gas
Join Date: Jun 2022
Posts: 2
Rep Power: 0 ![]() |
Hello,
I've been modeling some explosion simulations using FLACS by Gexcon, it has been ok with some reliable results. I want to try to do the same simulation with Star CCM+ to validate its results with flacs, the problem is there are many models to choose from in star regarding flamlets and reacting flow and I can determine the convenient models the basic simulation is very simple, it consists of blowing a quantity of propane inside a closed room with a spark. Does anyone have a former experience with explosion simulation using star ccm+? Is it capable of doing so? Thanks |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
mad gas
Join Date: Jun 2022
Posts: 2
Rep Power: 0 ![]() |
Still no answer?
I was further looking into the matter but I cannot see any tutorial other than simple combustion ones. My main goal from the blast simulation is to measure pressure on the walls and the temperature of gas |
|
![]() |
![]() |
![]() |
![]() |
#3 |
Member
Marc Ricart
Join Date: Jul 2022
Posts: 65
Rep Power: 4 ![]() |
Hello, I am still interested on that. Do you know any easy way to calculte the internal pressure after an explosion? STAR-CCM+ would be ideal but I am open to other softwares
|
|
![]() |
![]() |
![]() |
Tags |
explosions, starccm+ |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
Problem In Star CCM Plus | ramarya | STAR-CCM+ | 1 | July 10, 2011 05:59 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
Two-Phase Buoyant Flow Issue | Miguel Baritto | CFX | 4 | August 31, 2006 12:02 |
Gas pressure question | Dan Moskal | Main CFD Forum | 0 | October 24, 2002 22:02 |