 |
 |
 |
|
|
|
[Sponsors] | ||||
June 7, 2021, 07:20
|
STAR CCM+ Adjoint convergence
|
#1 |
|
New Member
Julius
Join Date: May 2019
Posts: 7
Rep Power: 7  |
I want to use adjoint on an external aero case with about 75mio cells, coupled k-w and Reynolds of 10^5. My costfunction is drag. As the residual plot show there isn't any convergence or even any real change after the first iteration running the adjoint.
Primal sultion is well converged (apart from SDR which is a little high). I already swithed to flexible GMRES and changed courant but that doesn't help. Does sb. have an ideas or can give me some pointers? hy1xnvihft371.jpg |
|
|
|
|
 |
| Tags |
| adjoint, external aerdynamics |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Adjoint Convergence Problem | FlyBob91 | OpenFOAM Running, Solving & CFD | 1 | April 27, 2017 06:02 |
| Fluent Adjoint Solver Convergence Issue? | ex10148 | FLUENT | 2 | July 25, 2016 15:41 |
| Poor convergence in Continuous Adjoint | twr412 | SU2 | 0 | June 28, 2016 11:47 |
| problem when imported geometry from 3D CAD to star ccm, | TAREK GANAT | STAR-CCM+ | 1 | May 21, 2013 23:15 |
| A genearl question on STAR CCM | nstar | STAR-CCM+ | 5 | June 24, 2009 10:39 |
Linear Mode
