Calculation of turbine rotating speed

mohammad · October 26, 2020, 05:00

Hi,

How should I set a simulation in order to be able to see what is the resulting rotational speed of a wind turbine at a certain wind velocity?

Seervan · November 2, 2020, 12:06

I would measure the velocity at on point on the turbine blade, say tip, for example, due to the non-slip condition, the velocity (not averaged velocity) of the fluid on the first prism layer on the blade surface would be the velocity of your blade. That would be your linear velocity and then you can convert that into rotational velocity and thus RPM.

profi_star-ccm+ · November 12, 2020, 10:30

Set the wind speed at the inlet boundary and the pressure at the outlet boundary or outlet at the outlet boundary. Generate a fan angular speed report and display it on the working area. Add loft velocity and pressure fill.

Set the initial wind speed in the block itself equal to the wind speed at the entrance border. Use a rate constant if you don't understand the other option.

October 26, 2020, 05:00	Calculation of turbine rotating speed	#1
mohammad Senior Member mohammad Join Date: Dec 2010 Location: UK Posts: 245 Rep Power: 16	Hi, How should I set a simulation in order to be able to see what is the resulting rotational speed of a wind turbine at a certain wind velocity?

November 12, 2020, 10:30		#3
profi_star-ccm+ New Member Aleksandr Join Date: Nov 2020 Location: Russia city Yakutsk Posts: 15 Rep Power: 6	Set the wind speed at the inlet boundary and the pressure at the outlet boundary or outlet at the outlet boundary. Generate a fan angular speed report and display it on the working area. Add loft velocity and pressure fill. Set the initial wind speed in the block itself equal to the wind speed at the entrance border. Use a rate constant if you don't understand the other option. Last edited by profi_star-ccm+; November 13, 2020 at 00:51.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calculation diverges, Liquid behavior around a rotating object	toru	OpenFOAM Running, Solving & CFD	0	December 1, 2016 11:54
UDF error - parabolic velocity profile - 3D turbine	Zaqie	Fluent UDF and Scheme Programming	9	June 25, 2016 20:08
problem in the calculation of pressure drop for an axial turbine	aja1345	FLUENT	0	January 1, 2016 15:07
velocity profile at a ducted turbine intake	Cajamarca	CFX	1	September 29, 2015 21:02
Variables Definition in CFX Solver 5.6	R P	CFX	2	October 26, 2004 03:13

November 2, 2020, 12:06		#2
Seervan Member Soroush Kargar Join Date: Apr 2017 Posts: 45 Rep Power: 9	I would measure the velocity at on point on the turbine blade, say tip, for example, due to the non-slip condition, the velocity (not averaged velocity) of the fluid on the first prism layer on the blade surface would be the velocity of your blade. That would be your linear velocity and then you can convert that into rotational velocity and thus RPM.