Plot XY of wing profile

The · August 27, 2020, 14:26

Hi,

I am interested in particles "hitting" a wing but only on the marked red line of the wing (see the picture). What is the best way to do it? At the moment I can only do plots like y=Mass(x) but the x is not limited and therefore also the mass on top of the wing is included in the plot.

Thanks!

ping · September 4, 2020, 06:21

if i get what you are asking then you need to divide your wing boundary into two separate walls with one being the red section shown.
then report or plot or scene display with on just that wall boundary.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3d wing, chord surface pressure plot.	Mash	OpenFOAM Post-Processing	0	March 11, 2017 07:23
Plot velocity profile at different position	AirS	Main CFD Forum	2	December 3, 2010 07:03
plot pressure distribution on a section of 3D wing	ROOZBEH	FLUENT	3	April 21, 2008 04:30
Wing profile and stall	Jens	Main CFD Forum	0	June 26, 2007 10:42
Pressure plot by wing slice	Matt	FLUENT	1	November 26, 2005 21:04

September 4, 2020, 06:21		#2
ping Senior Member Ping Join Date: Mar 2009 Posts: 556 Rep Power: 20	if i get what you are asking then you need to divide your wing boundary into two separate walls with one being the red section shown. then report or plot or scene display with on just that wall boundary.