Home > Forums > Software User Forums > Siemens > STAR-CCM+

FGM table in STAR CCM+

Updated Threads

Reply

Search this Thread

August 30, 2019, 07:57	FGM table in STAR CCM+	#1
dsj New Member David Join Date: Aug 2019 Posts: 1 Rep Power: 0	The starccm+ manual states that when using the FGM model, a single point is recommended for the progress variable variance, i.e. an assumed delta function PDF for the progress variable. Can someone explain why? Does this refer to both 0D and 1D reactor types, or just to the 0D case?

Reply

Tags

fgm, reacting flow, starccm+

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem when imported geometry from 3D CAD to star ccm,	TAREK GANAT	STAR-CCM+	1	May 21, 2013 23:15
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 05:04
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 05:38
error in star ccm	maurizio	Siemens	3	October 16, 2007 06:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 05:15

All times are GMT -4. The time now is 16:17.