 |
 |
 |
|
|
|
[Sponsors] | ||||
Export Pressure Data From StarCCM+ to Nastran |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 17, 2019, 10:23
|
Export Pressure Data From StarCCM+ to Nastran
|
#1 |
|
Member
Danny
Join Date: Jun 2018
Location: Rome, Italy
Posts: 36
Rep Power: 8  |
Hi,
i've run an analysis with STAR-CCM+ and now, at the end of the simulation, i want to export the pressure data acting on the surface of the body to Nastran (for example). I've imported the CAE model, then i've mapped the surface from the Boundary to that CAE model and finally exported in a *.bdf file the pressure data. I've followed these passages but this procedure doesn't work. Can someone tell me where i go wrong? Or maybe another method to use. Thanks my friends. Best wishing. Greetings, Daniele. |
|
|
|
|
|
| Tags |
| export data, nastran openfsi mpcci, star ccm+ |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Computed Pressure Drop is lower than experimental data | Ash Kot | FLUENT | 2 | May 17, 2017 10:41 |
| Export Data Access Macross. Plot Second-Order Pressure. | BrianGrass | FLUENT | 2 | May 13, 2017 16:15 |
| CFX Solver stopped with error when requested for backup during solver running | Mfaizan | CFX | 40 | May 13, 2016 07:50 |
| static vs. total pressure | auf dem feld | FLUENT | 17 | February 26, 2016 14:04 |
| Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 16:00 |
Linear Mode
