Same calculation, Different result.

stigmapro · March 5, 2018, 01:48

The calculations that had previously converged are still being performed. However, the result is different. It is diverging at a certain point in time. Even if the boundary condition or the resistance value is specified differently, it radiates in the same place. It is hard to understand that the same file is run but the results are different. Have you ever experienced this situation?

me3840 · March 7, 2018, 01:48

You can't run the same file twice and get two different answers, something has changed between them. Do you mean you are extending a certain run? If so it's certainly possible for a seemingly converged run to diverge later. You will have to give more details (and some pictures) if you want more help.

steve lee · March 7, 2018, 22:02

Hello. Yu

I also found the same situation many times..
Sometimes CCM+ predicts different result.
If the cases have the same MESH and PHYSICS.
(almost all people don't know this problem...)

If you want to talk about this problem.. send me a message.

March 5, 2018, 01:48	Same calculation, Different result.	#1
stigmapro New Member Yu Join Date: Mar 2018 Location: Seoul Posts: 1 Rep Power: 0	The calculations that had previously converged are still being performed. However, the result is different. It is diverging at a certain point in time. Even if the boundary condition or the resistance value is specified differently, it radiates in the same place. It is hard to understand that the same file is run but the results are different. Have you ever experienced this situation?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Workbench] Current result file may not contain requested result data	zhizhuo	ANSYS Meshing & Geometry	0	December 13, 2017 05:18
Different Result between FLUENT and CFD Post	free.man	FLUENT	0	February 10, 2017 00:20
Increase in CPU number during the FIRE calculation	amin_u50	AVL FIRE	0	August 6, 2014 09:34
Calculation of initial k for RAS turbulence models	shipman	OpenFOAM	1	August 28, 2013 04:52
Read Result Files or User Defined Result	Aquilaris	ANSYS	0	February 9, 2011 06:25

March 7, 2018, 01:48		#2
me3840 Senior Member Join Date: Nov 2010 Location: USA Posts: 1,232 Rep Power: 25	You can't run the same file twice and get two different answers, something has changed between them. Do you mean you are extending a certain run? If so it's certainly possible for a seemingly converged run to diverge later. You will have to give more details (and some pictures) if you want more help.

March 7, 2018, 22:02		#3
steve lee Member Steve Join Date: Mar 2018 Location: South Korea Posts: 69 Rep Power: 8	Hello. Yu I also found the same situation many times.. Sometimes CCM+ predicts different result. If the cases have the same MESH and PHYSICS. (almost all people don't know this problem...) If you want to talk about this problem.. send me a message.