|
[Sponsors] |
May 23, 2017, 09:59 |
Boundary Condition in a co-simulation
|
#1 |
New Member
Simen
Join Date: Dec 2016
Posts: 3
Rep Power: 8 |
Hi,
I am running a co-simulation with Abaqus in a implicit coupling. The case is a free-falling lifeboat starting 20 cm before the water surface with inital conditions of 60 degrees and 21 m/s velocity. I have established a co-simulation and it is running, the problem is that the pressure from Abaqus odb is not the same, or has the same tendency, as the pressure obtained directly from Star. Since this is a moving body, should the Abaqus model have any boundary conditions? The user guide for Star only states that the models should be equal, which they are, at least in size, weight and moments of inertias. Thank you for all replies. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
Problem in setting Boundary Condition | Madhatter92 | CFX | 12 | January 12, 2016 04:39 |
Time dependant pressure boundary condition | yosuke1984 | OpenFOAM Verification & Validation | 3 | May 6, 2015 06:16 |
several fields modified by single boundary condition | schröder | OpenFOAM Programming & Development | 3 | April 21, 2015 05:09 |
Boundary Condition question for Cooling Water Pumps Bay Simulation | Jaimito | FLUENT | 0 | August 3, 2010 06:58 |