Home > Forums > Software User Forums > Siemens > STAR-CCM+

Turning circle/ Zig-zag manoeuvring using Star CCM+

Updated Threads

Reply

Search this Thread

May 8, 2017, 03:43	Turning circle/ Zig-zag manoeuvring using Star CCM+	#1
HHK Member HARIHARAN K Join Date: Oct 2014 Posts: 40 Rep Power: 12	Hi all, I am trying to simulate turning circle and zig-zag manoeuvring tests for a mariner class vessel using Star CCM+ (hull, rudder and propeller come into picture) using a set of overset meshes. I have made a few attempts and not yet succeeded. I would like to know if anyone in the group has done it. If yes, kindly give me some suggestions. Thank you. Following links will be helpful. https://www.youtube.com/watch?v=WS5WScEs8-U https://www.youtube.com/watch?v=QF7-7u2ldmo https://www.youtube.com/watch?v=4v60htbd8yk

Reply

Tags

manoeuvring, overset mesh, propeller, ship hydrodynamics, star ccm+

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem when imported geometry from 3D CAD to star ccm,	TAREK GANAT	STAR-CCM+	1	May 21, 2013 23:15
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 05:04
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 05:38
error in star ccm	maurizio	Siemens	3	October 16, 2007 06:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 05:15

All times are GMT -4. The time now is 09:07.