 |
 |
 |
|
|
|
[Sponsors] | ||||
Ice Layer Thickness Value does not change although Temperature changes on a surface |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 3, 2017, 09:13
|
Ice Layer Thickness Value does not change although Temperature changes on a surface
|
#1 |
|
New Member
Join Date: Mar 2017
Posts: 11
Rep Power: 9  |
Hello everyone.
I am trying to simulate the defrosting of a car's windscreen but I am facing troubles. For some reason, the ice layer thickness valeu does not decrease on my windscreen. However, the temperature gradually rises over the whole time. Before I simulated the defrosting, I simulated the flow inside the passenger compartment only solving for segregatee flow and K-Epsilon Turbulence until convergence. After that, I switched within the physics continuum to implicit unsteady, activated a 0.5 mm ice layer on the windscreen and froze everything except energy and DeIcing. When I simulate it, the temperature changes, but not the ice layer (same surface). Thanks for your help in advance. |
|
|
|
|
|
April 5, 2017, 06:52
|
Ice Layer Thickness Value does not change although Temperature changes on a surface
|
#2 |
|
New Member
Join Date: Mar 2017
Posts: 11
Rep Power: 9 |
Never mind.
After trying many different things I managed to fix the problem. It had to do with the stopping criteria for maximum inner iterations. Now the ice layer updates every 5 iterations Sent from my iPhone using CFD Online Forum mobile app Last edited by Dehyp; April 5, 2017 at 07:56. |
|
|
|
|
|
|
April 5, 2017, 09:20
|
|
#3 |
|
Member
Nils Hennig
Join Date: Apr 2015
Posts: 44
Rep Power: 11 |
Maybe it was only the update Intervall for your scalar-scene?
|
|
|
|
|
|
|
| Tags |
| deicing, ice melting, temperature, unsteady, windscreen |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [openSmoke] libOpenSMOKE | Tobi | OpenFOAM Community Contributions | 562 | January 25, 2023 10:21 |
| [snappyHexMesh] SnappyHexMesh Internal Flow Example (Diesel Injector) | Irish09 | OpenFOAM Meshing & Mesh Conversion | 23 | July 15, 2013 08:45 |
| [snappyHexMesh] Effect of adding layers with sHM | Nucleophobe | OpenFOAM Meshing & Mesh Conversion | 4 | August 20, 2012 17:45 |
| [snappyHexMesh] Problem with snappyHex: no body | lovecraft22 | OpenFOAM Meshing & Mesh Conversion | 5 | June 23, 2010 12:05 |
| errors | Fahad | Main CFD Forum | 0 | March 23, 2004 14:20 |
Linear Mode
