|
[Sponsors] |
March 4, 2017, 19:51 |
Split Flow Domain
|
#1 |
New Member
Jaydeep Kashikar
Join Date: Mar 2017
Posts: 3
Rep Power: 9 |
Hello,
I wanted to know is it possible to create a split flow domain in STAR CCM. What i mean by it is outlet conditions of one flow domain being used as inlet conditions for another. I want to analyse a vehicle in the wake of another. Since putting in 2 vehicles in the same domain may require a lot of computing capacity and time. So I wanted know if this is possible and if so how does one go about doing it. |
|
March 5, 2017, 05:35 |
|
#2 |
Senior Member
Ping
Join Date: Mar 2009
Posts: 556
Rep Power: 20 |
sounds like you want to run two separate cases with the second having the outlet flow conditions from the first as inlet to the second.
if this is what you want then it is easy using a table to store the outlet boundary state of the v components and pressure and tke and tdiss then save this as a csv file and import into the second case and apply as the inlet conditions |
|
March 5, 2017, 08:39 |
|
#3 |
New Member
Jaydeep Kashikar
Join Date: Mar 2017
Posts: 3
Rep Power: 9 |
Thanks. yes that's exactly waht i want. i will give it a try....dont know how exactly to do it though
|
|
March 5, 2017, 14:17 |
|
#4 |
Senior Member
Lane Carasik
Join Date: Aug 2014
Posts: 692
Rep Power: 15 |
||
Tags |
star ccm+, turbulence analysis, wake modeling |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
About Some Concepts:Laminar flow, turbulent flow, steady flow and time-dependent flow | Jing | Main CFD Forum | 8 | October 5, 2018 18:02 |
Domain format problem on airfoil flow simulation | andrenonaka | CFX | 14 | December 7, 2015 01:42 |
Setting rotating frame of referece. | RPFigueiredo | CFX | 3 | October 28, 2014 05:59 |
[blockMesh] Flow domain by BLOCKMESH for plasma induced flow simulation | mukut | OpenFOAM Meshing & Mesh Conversion | 0 | June 2, 2014 07:19 |
Error finding variable "THERMX" | sunilpatil | CFX | 8 | April 26, 2013 08:00 |