Solid Temperature in porous Media

iamsarthaknag · May 2, 2016, 13:55

I am working on a simulation which consists of hot air flowing through a porous solid. I need to find the transient temperature of the porous solid. However, the porous medium option only shows up when I select gas physics model for the region (the porous option disappears if solid physics model is selected). The temperature scene that is available only seems to show the temperature of the air (or average of the solid+air ?).

Is there a way to find the temperature of only solid part in Star CCM+?

marmot · May 23, 2016, 08:14

This is an old post perhaps you figured something out by now, if you use only 1 region you will only get an average temperature, you set the porosity value (fluid/total) and you give the solid properties but you will only see one temperature.

Perhaps you can read about heat exchanger models, dual stream, there is some idea with fluid/solid heat exchanger or having 2 regions, 2 physics continuum and exchanging heat with a volume heat source,

May 2, 2016, 13:55	Solid Temperature in porous Media	#1
iamsarthaknag New Member Sarthak Nag Join Date: Jun 2014 Location: Himachal Pradesh Posts: 3 Rep Power: 12	I am working on a simulation which consists of hot air flowing through a porous solid. I need to find the transient temperature of the porous solid. However, the porous medium option only shows up when I select gas physics model for the region (the porous option disappears if solid physics model is selected). The temperature scene that is available only seems to show the temperature of the air (or average of the solid+air ?). Is there a way to find the temperature of only solid part in Star CCM+?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
porous media combustion	zuby	FLUENT	2	August 31, 2015 05:42
Scalar temperature transport in porous media unbounded at sharp transitions	jameswilson620	Main CFD Forum	0	March 31, 2015 18:59
combustion in porous media burner	zuby	ANSYS	0	July 27, 2009 03:26
Porous Media as solid object	Tom	FLUENT	4	April 11, 2005 08:52
temperature distribution in porous media	Alexey	Siemens	1	June 23, 2003 02:11

May 23, 2016, 08:14		#2
marmot Senior Member kevin alun Join Date: Sep 2011 Location: Germany Posts: 106 Rep Power: 15	This is an old post perhaps you figured something out by now, if you use only 1 region you will only get an average temperature, you set the porosity value (fluid/total) and you give the solid properties but you will only see one temperature. Perhaps you can read about heat exchanger models, dual stream, there is some idea with fluid/solid heat exchanger or having 2 regions, 2 physics continuum and exchanging heat with a volume heat source,