|
[Sponsors] |
January 7, 2016, 17:20 |
memory access exception when re-partitioning
|
#1 |
Member
Alberto
Join Date: Aug 2015
Posts: 31
Rep Power: 11 |
Hi. I am working with a wind turbine using macros. When I do mesh refinement and run again (I reset and initialize interface between rotation and static regions before run) I get a memory access exception. I don't know why it happens.
I solve the problem just saving it after refinement, closing and opening again the simulation and run. The problem is that it all takes a long time and I want it goes on just with the macro without any action. Which could be the problem? I don't understand why opening again solve this. I have found running with only one processor it works fine. Anyone who knows how could I work with more than one processor? Thx. Last edited by Alberto Damas; January 9, 2016 at 08:28. |
|
January 11, 2016, 16:41 |
|
#2 |
Senior Member
Matt
Join Date: Aug 2014
Posts: 947
Rep Power: 18 |
Sometimes the partitioning can fail. Try using either 1 more or 1 fewer cores and see if that fixes it for you.
|
|
Tags |
interface, memory access exception, rotating |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SIGSEGV: memory access exception | shawn123 | STAR-CCM+ | 14 | January 20, 2020 07:07 |
SIGSEGV: memory access exception | padimgr | Main CFD Forum | 0 | February 13, 2015 12:55 |
inconsistant SIGSEGV: memory access exception | hiddenbunny | STAR-CCM+ | 16 | February 6, 2015 09:11 |
SIGSEGV: memory access exception | Praveen_371 | STAR-CCM+ | 1 | May 6, 2012 10:37 |
Streamlines -> SIGSEGV: memory access exception | eRzBeNgEl | Siemens | 1 | July 28, 2011 10:35 |