|
[Sponsors] |
November 3, 2014, 10:34 |
importing ducted fan from catia to star ccm
|
#1 |
New Member
Daniel
Join Date: Sep 2014
Posts: 12
Rep Power: 12 |
Hi
im new in star ccm. i have some problem with my geometry of ducted fan when im trying to import it to STAR CCM+..i assembled two part designs in CATIA (which is the fan and the others like the flow field and the duct). do you guys reckon that i should do it in one part design or it doesnt matter? when i tried to import the assembly, only the duct and flow field left in STAR CCM+. also another thing that i tried is to import the fan itself, it says that it cant find the license. is there something wrong with my STAR CCM? here attached the geometry of the fan and the rest. thank you |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem when imported geometry from 3D CAD to star ccm, | TAREK GANAT | STAR-CCM+ | 1 | May 21, 2013 23:15 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 05:04 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 05:38 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |
axial flow in counter rotating ducted fan | Vishu | FLUENT | 4 | January 13, 2004 18:52 |