front wing simulation

pikachu · July 4, 2014, 08:38

Hi, I am new using star ccm and I want to calculate CL(Downforce coefficient) and Cd coefficient of the front wing of the formula 1 car. I have the model of the car in .stl but I don't know if it is necesary to make the wind tunnel model or if I can do it without it. Anothe questions is how can do the simulation only with the front wing and "eliminate" the rest of the car.
thank you very much!!

me3840 · July 6, 2014, 11:41

Yes, you must include the wind tunnel.

And if you don't want to include the rest of the car, just don't. But that may not yield the same answer as the wing on the car.

July 4, 2014, 08:38	front wing simulation	#1
pikachu New Member Teresa Join Date: Jul 2014 Posts: 2 Rep Power: 0	Hi, I am new using star ccm and I want to calculate CL(Downforce coefficient) and Cd coefficient of the front wing of the formula 1 car. I have the model of the car in .stl but I don't know if it is necesary to make the wind tunnel model or if I can do it without it. Anothe questions is how can do the simulation only with the front wing and "eliminate" the rest of the car. thank you very much!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Meshing 3D wing (hydrofoil) fails	klausb	OpenFOAM Meshing & Mesh Conversion	0	December 28, 2011 15:26
Pitching Wing simulation	rieuk	OpenFOAM	5	March 21, 2010 04:12
Simulation of ONERA M6 wing	mecbe2002	OpenFOAM	0	March 4, 2010 02:20
LES of wing... ned help	mariachi	FLUENT	9	January 19, 2010 12:55
Setting up Flow around a Wing Simulation help	Atella	CFX	3	January 3, 2010 12:51

July 6, 2014, 11:41		#2
me3840 Senior Member Join Date: Nov 2010 Location: USA Posts: 1,232 Rep Power: 25	Yes, you must include the wind tunnel. And if you don't want to include the rest of the car, just don't. But that may not yield the same answer as the wing on the car.