|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Anon
Join Date: May 2014
Posts: 1
Rep Power: 0 ![]() |
Hi, we're trying to run a few simulations on the virtual family models that can be found here
However, we can't seem to be able to import the models into the star-ccm+ software. We've tried opening the files in SEMCAD X, and then exporting them as an .igs or .step file, but it doesn't seem to work. When importing the files, we get an error stating "Error during CAD import. Details in log file C:......." And in the log file we find "ERR LoadFromFile Error -10005 C:..." Any ideas on what the problem is, or how to import the model? However, when I open the virtual family in SEMCAD X, then add any type of geometry or figure to the model, when I export and then import into star-ccm+, the object I added is imported, and nothing else it. It also doesn't give an error. What are we doing wrong? |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Ping
Join Date: Mar 2009
Posts: 556
Rep Power: 20 ![]() |
if you provide a small sample file of this format we might be able to help since i have not heard of it before and dont want to sign up to their website...
|
|
![]() |
![]() |
![]() |
Tags |
cad, import, semcad x, simulate, virtual family |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem when imported geometry from 3D CAD to star ccm, | TAREK GANAT | STAR-CCM+ | 1 | May 21, 2013 22:15 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
error in star ccm | maurizio | Siemens | 3 | October 16, 2007 05:17 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |