problem with Injection

Mark_89 · November 8, 2013, 19:40

Hi, I have to simulate an injection process of the internal combustion engine. Unfortunately I don't view the injected fuel in the properly scene, where I have plotted "incident mass flux of Fuel". "Fuel" is the name of lagrangian phase that I have imposed. The problem is I don't know if fuel is injected or not!
How can i know if the fuel is injected? How can I see the fuel cone injector in the scene?
Thank you in advance

siara817 · December 19, 2013, 06:20

Have you tried using track in the lagrangian phase?
You can see also the lagrangian phase using streamline and then add lagrangian phase as the input to the steamline.

November 8, 2013, 19:40	problem with Injection	#1
Mark_89 New Member Marco Join Date: Aug 2013 Posts: 13 Rep Power: 13	Hi, I have to simulate an injection process of the internal combustion engine. Unfortunately I don't view the injected fuel in the properly scene, where I have plotted "incident mass flux of Fuel". "Fuel" is the name of lagrangian phase that I have imposed. The problem is I don't know if fuel is injected or not! How can i know if the fuel is injected? How can I see the fuel cone injector in the scene? Thank you in advance

December 19, 2013, 06:20		#2
siara817 Senior Member siamak rahimi ardkapan Join Date: Jul 2010 Location: Copenhagen, Denmark Posts: 220 Rep Power: 18	Have you tried using track in the lagrangian phase? You can see also the lagrangian phase using streamline and then add lagrangian phase as the input to the steamline. __________________ Good luck Siamak

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem with DPM injection	Hayder Mohammed	Main CFD Forum	0	August 12, 2013 03:01
jou file command for the injection!	asal	FLUENT	0	June 4, 2013 05:15
Can I solve this problem by Fluent?	Kai_kc	FLUENT	1	October 27, 2010 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 20:13
DPM injection problem	akr	FLUENT	5	November 6, 2006 11:34