Validation of Star CCM+

iand · November 25, 2010, 01:58

Hi Guys

We have carried out a fire model for a two storey open plan building using Star CCM+. Unfortunately the 3rd party reviewer claims never to have heard of Star CCM+ and needs proof of validation for the use of this software. Unfortunately we cannot get rid of the 3rd party reviewer.

We have unsuccessfuly tried to get this information from Cd-adapco in the UK. Anyone have any ideas where we can get some form of proof of Star CCM+'s validaty for use with a fire/smoke buoyancy model or even just a validation document reference for Star CCM+?

Any suggestions gratefully received

Stephen Ferguson · November 25, 2010, 05:50

Ian,

We have extensive validation data for fire and smoke modeling. PM me with your email address and I'll put you in touch with our expert.

Stephen (CD-adapco)

Maddin · December 8, 2010, 07:59

Ui... Adapco Support is present here, nice

Would be nice when support also helps in other threads (sometime reading the manual isn't enough).

November 25, 2010, 01:58	Validation of Star CCM+	#1
iand New Member Ian Join Date: Nov 2010 Posts: 1 Rep Power: 0	Hi Guys We have carried out a fire model for a two storey open plan building using Star CCM+. Unfortunately the 3rd party reviewer claims never to have heard of Star CCM+ and needs proof of validation for the use of this software. Unfortunately we cannot get rid of the 3rd party reviewer. We have unsuccessfuly tried to get this information from Cd-adapco in the UK. Anyone have any ideas where we can get some form of proof of Star CCM+'s validaty for use with a fire/smoke buoyancy model or even just a validation document reference for Star CCM+? Any suggestions gratefully received

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 05:04
STAR CMM+ vs STAR CD	jovandoric	STAR-CD	0	April 27, 2010 10:47
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 05:38
error in star ccm	maurizio	Siemens	3	October 16, 2007 06:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 05:15

November 25, 2010, 05:50		#2
Stephen Ferguson New Member Stephen Ferguson (CD-adapco) Join Date: Nov 2010 Posts: 1 Rep Power: 0	Ian, We have extensive validation data for fire and smoke modeling. PM me with your email address and I'll put you in touch with our expert. Stephen (CD-adapco)

December 8, 2010, 07:59		#3
Maddin Senior Member Join Date: Mar 2009 Posts: 260 Rep Power: 18	Ui... Adapco Support is present here, nice Would be nice when support also helps in other threads (sometime reading the manual isn't enough).