|
[Sponsors] |
June 5, 2007, 05:15 |
Strarting load step number
|
#1 |
Guest
Posts: n/a
|
Hi, my next question is: i solve transient problem, and when solver ran (pmovlink, starlink etc), we have some information about problem in terminal window, in particular Starting Load Step Nuumber. Once this number became 2 (not 1). I don't know why. And now in Advanced Transient panel I need to define 2 load steps end set number of load steps for next analysis from 1 to 2 to solve transient problem. If anybobe knows, please say me how can I change this Starting Load Step Nuumber? Thanks. PS: I use STAR-CD V3.15 but I should be please for inormation about other version.
|
|
June 15, 2007, 17:43 |
Re: Strarting load step number
|
#2 |
Guest
Posts: n/a
|
This might be an error in the old version of STAR-CD/pro-STAR you're using. Try a newer version and make sure the setting in the advanced transient panel is correct - i.e. starting load step. Why do you have to use advanced transient at all?
|
|
June 21, 2007, 10:01 |
Re: Strarting load step number
|
#3 |
Guest
Posts: n/a
|
This is quite convenient ) The probleme was in STAR-CD on my machine: after STAR-CD runing, when button SAve in Advanced Transient panel firstly clicked, ramp/step was set up ramp from step automatically (I didn't pay attention on this) and solving started from second load step. This happens only on my PC. )) unique phenomenon.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
number of iterations per time step | chouki | FLUENT | 1 | August 13, 2013 01:11 |
SELECTING TIME STEP SIZE, NUMBER OF TIME STEP | NITUL KALITA | FLUENT | 2 | November 22, 2012 09:28 |
variable time step with max courant number | lelia | Siemens | 1 | October 3, 2008 01:46 |
udf - iteration number within one time step?! | Mira | FLUENT | 1 | January 23, 2008 04:16 |
starting load step number!!!??? | KtoTo | Siemens | 0 | April 4, 2007 06:44 |