|
[Sponsors] |
June 14, 2006, 04:49 |
Usage of Star-CD in analysis of Wind Turbine
|
#1 |
Guest
Posts: n/a
|
Hello all,
Myself, i am a student of turbomachine and i am doing aerodynamic analysis of stall regulated 2 bladed wind turbine. I have used the basic BEMT methodology as well as a commercial software Bladed for analysis. i intend to use a CFD package for the same. So if any one of you can give me a feedback so as to how can i proceed with the highly unsteady and turbulent environment of 3D analysis of wind turbine, it will be helpful. Do sent your feedback at manabendra_de@rediffmail.com thanx and regards manabendra de |
|
June 27, 2006, 05:35 |
Re: Usage of Star-CD in analysis of Wind Turbine
|
#2 |
Guest
Posts: n/a
|
HELLO! I would like to send me a software demo.SOFTWARE DEMO - SOFTWARE CFD FOR TURBO MACHINES.Thank you
|
|
August 28, 2006, 18:07 |
Re: Usage of Star-CD in analysis of Wind Turbine
|
#3 |
Guest
Posts: n/a
|
HELLO! I would like to send me a software demo.SOFTWARE DEMO - SOFTWARE CFD FOR TURBO MACHINES. Thank you
|
|
September 25, 2006, 16:02 |
Re: Usage of Star-CD in analysis of Wind Turbine
|
#4 |
Guest
Posts: n/a
|
ask for a demo from your local agent with starccm+ (not star-cd)
|
|
November 18, 2006, 08:29 |
Re: Usage of Star-CD in analysis of Wind Turbine
|
#5 |
Guest
Posts: n/a
|
Grid connect WIND ENERGY System's output is connected to your ring main via a Grid-tie inverter which produces 230 volts AC @ 50Hz (240 volts AC @ 60Hz )synchronized to the grid. When the turbine's power is not required in the house, the surplus flows back out to the local grid. You will need an export electricity meter and tariff agreement with the power supplier if the value of your exported energy is to be credited. That grid-tied inverters are designed to be switched off in the event of power failure.
This is where Hailite Windpower comes in. www.windchina.cn |
|
January 7, 2007, 00:42 |
Re: Usage of Star-CD in analysis of Wind Turbine
|
#6 |
Guest
Posts: n/a
|
Kence Windpower Co. is a leading company in wind energy development and application. We have an advanced expert consultant team in wind energy, and do well in wind turbine subsequence development and perfecting technology. Our main products are wind turbines ranged from 200w to 15kw. Wind turbine system is an ideal power supply for separate house, island, observatory, sentry, signal transformation station, communities and other places with good wind resource. Our wind turbine is beautiful, little noises and safe. Wind turbine uses directly drive permanent magnet generator which is made of strong magnet; its overloading capacity can reach 2 times than rated. Wind turbine can start up with breeze. Blade is designed on base of wind tunnel testing and is made in a similar way to airfoil. There are two ways to limit the rotor speed automatically to protect wind generator: yawing and electromagnetic braking. A patent tilt-up tower makes wind turbine installation and maintenance easier. Bring brightness to every corner in the world!
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFD analysis on wind turbine rotor | Ken (Wind Turbine CFD Super Rookie) | Main CFD Forum | 45 | February 9, 2016 15:07 |
analysis of wind turbine blades | sharuk | Main CFD Forum | 7 | December 9, 2014 19:59 |
Vertical axis wind turbine CFD Analysis | Akhilesh | FLUENT | 4 | April 13, 2012 17:44 |
RPM in Wind Turbine | Pankaj | CFX | 9 | November 23, 2009 05:05 |
wind turbine | Jackie | FLUENT | 3 | June 28, 2005 04:20 |