 |
 |
 |
|
|
|
[Sponsors] | ||||
August 2, 2005, 09:15
|
mesh problem
|
#1 |
|
Guest
Posts: n/a
|
I have generated a 2D shell model in x-y plane but have no idea how to extrude it to 3D. I know the command 2D3D but it seems that it only allows me to extrude with a constant thickness (one cell thick). Could anybody help me in this regard. Thanks.
|
|
|
||
|
August 2, 2005, 09:22
|
Re: mesh problem
|
#2 |
|
Guest
Posts: n/a
|
Have you tried the VCEX command yet?
|
|
|
|
||
|
August 2, 2005, 09:30
|
Re: mesh problem
|
#3 |
|
Guest
Posts: n/a
|
Thanks,4xF! Actually I just use 2D3D to extrude it by one layer. Anything I could do now to extrude it further? I tried VCEX but the following error message appears: ERROR - NO VALID EXTRUDABLE CELLS CHOSEN. Thanks in advance.
|
|
|
|
||
|
August 2, 2005, 10:06
|
Re: mesh problem
|
#4 |
|
Guest
Posts: n/a
|
||
|
|
||
|
August 2, 2005, 12:24
|
Re: mesh problem
|
#5 |
|
Guest
Posts: n/a
|
Thanks, William!! The following command extrudes 50 in the positive x position. What if I want to extrude in the z position? And what does the number '1.03' and '300' mean?
Vcex,60,offset,cset,,,local,1.03,,,,nonun,300 |
|
|
|
||
|
August 2, 2005, 13:34
|
Re: mesh problem
|
#6 |
|
Guest
Posts: n/a
|
Try: help vcex
|
|
|
|
||
|
August 3, 2005, 06:31
|
Re: mesh problem
|
#7 |
|
Guest
Posts: n/a
|
The problem has been fixed! Thank you very much.
|
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 3D mesh problem | sphinx | FLUENT | 0 | July 24, 2008 13:26 |
| Mesh problem? | Jake | FLUENT | 2 | March 26, 2008 19:05 |
| Problem with mesh | msg30 | OpenFOAM Running, Solving & CFD | 2 | May 7, 2007 14:03 |
| mesh problem in 3D | abdellah | FLUENT | 0 | March 15, 2005 05:30 |
| CFX Mesh problem | Atit Koonsrisuk | CFX | 4 | October 5, 2004 09:14 |
Linear Mode
