bcheck,all BEGIN CHECKING ALL BOUNDARIES

PRELIMINARY SEARCH FOUND:

37259 FLUID CELLS, 0 BAFFLES CONJUGATE HEAT TRANSFER TURNED OFF - ANY SOLID CELLS WILL BE IGNORED

BEGINNING CONNECTIVITY SEARCH

2000 CELLS PROCESSED

4000 CELLS PROCESSED

6000 CELLS PROCESSED

8000 CELLS PROCESSED

10000 CELLS PROCESSED

12000 CELLS PROCESSED

14000 CELLS PROCESSED

16000 CELLS PROCESSED

18000 CELLS PROCESSED

20000 CELLS PROCESSED

22000 CELLS PROCESSED

24000 CELLS PROCESSED

26000 CELLS PROCESSED

28000 CELLS PROCESSED

30000 CELLS PROCESSED

32000 CELLS PROCESSED

34000 CELLS PROCESSED

36000 CELLS PROCESSED

223554 CELL FACES TO PROCESS **WARNING - BAFFLE CELL 1 IS NOT ATTACHED TO ANY

FLUID OR SOLID CELLS. BAFFLE IGNORED. **WARNING - BAFFLE CELL 3 IS NOT ATTACHED TO ANY

FLUID OR SOLID CELLS. BAFFLE IGNORED. **WARNING - BAFFLE CELL 7 IS NOT ATTACHED TO ANY

FLUID OR SOLID CELLS. BAFFLE IGNORED.

---------------------- **WARNING - BAFFLE CELL 37258 IS NOT ATTACHED TO ANY

FLUID OR SOLID CELLS. BAFFLE IGNORED.

FIRST PASS COMPLETE. FINAL COUNT IS:

37259 FLUID CELLS, 0 BAFFLES

0 TRIM CELLS, 0 TRIM COUPLES

BEGINNING SEARCH FOR INTERNAL CUTS. 37259 CELLS TO SEARCH.

2000 CELLS SORTED

4000 CELLS SORTED

6000 CELLS SORTED

8000 CELLS SORTED

10000 CELLS SORTED

12000 CELLS SORTED

14000 CELLS SORTED

16000 CELLS SORTED

18000 CELLS SORTED

20000 CELLS SORTED

22000 CELLS SORTED

24000 CELLS SORTED

26000 CELLS SORTED

28000 CELLS SORTED

30000 CELLS SORTED

32000 CELLS SORTED

34000 CELLS SORTED

36000 CELLS SORTED

SECOND PASS COMPLETE - 37259 FLUID CELLS FOUND ALL BOUNDARIES CHECKED SUCCESSFULLY

BOUN*>

================================================== ================================== **ERROR - CELL 37257 HAS PHYSICAL BOUNDARIES ON ALL SIDES **ERROR - CELL 37258 HAS PHYSICAL BOUNDARIES ON ALL SIDES **ERROR - CELL 37259 HAS PHYSICAL BOUNDARIES ON ALL SIDES

BEGINNING GEOMETRY WRITE TO FILE star.geom NEIGHBOR AND BOUNDARY LISTS - WRITTEN NUMBER OF CELLS WITH EDGES/POINTS ON THE SURFACE = 37259

GEOMETRY WRITE COMPLETED - FILE CLOSED

BEGINNING TO WRITE STAR PARAMETER FILE parm.inc STAR PARAMETER FILE WRITTEN TO FILE parm.inc

**PLEASE NOTE - MANY OTHER FUNCTIONS RELY ON SAVING THE .mdl FILE AFTER WRITING THE GEOMETRY FILE - YOU SHOULD SAVE NOW.

Are you by any chance using v3150A on a linux machine running Red Hat Enterprise? If so, there seems to be no cure for this problem. You can upgrade to v3.2 or use another OS.

thank you!

I am using V3.2 on WOW Paran2 linux machine

and more..

finally.. I found this problem

in this cas, I made my mistake at making cell generation process(making patching and then shells and...etc)

the mistake on the process making the cell caused that made baffle on each cell surface, which will not be appeared by "count cell" command

anyway, cell-making process is difficult to me..

thank you for your reply..