How to change FLexlm Host ID

January 7, 2005, 01:18

Dear

My workstation has two ethernet device (eth0, eth1). Some days ago, my workstation accidently shut down. Later I found that License manager does not run because Flexlm host ID has been changed. At this moment physical address of wrong ethernet device (eth0) is assigned as the host ID. (It can be checked with "lmhostid" command) My license file was written with physical address of eth1. Can you let me know how to change Flexlm ID to correct eth1? Thanks in advance.

January 7, 2005, 02:07

The only thing you can do is request a licence migration, unfortunately. That's the big problem with FlexLM, it's not very intelligent.

January 9, 2005, 21:56

I guess this may be fixed if I can change primary netwok device from eth0 to eth1 in Linux. Am I right? If so, can you help me change this in SUSE Linux?

January 10, 2005, 15:32

Not a clue, sorry. Linux not my forte.

January 11, 2005, 04:14

Hello,

As Brian suggested you, you need to contact a cd office in order to change your license file.

HV

January 7, 2005, 01:18	How to change FLexlm Host ID	#1
Jihwan Guest Posts: n/a	Dear My workstation has two ethernet device (eth0, eth1). Some days ago, my workstation accidently shut down. Later I found that License manager does not run because Flexlm host ID has been changed. At this moment physical address of wrong ethernet device (eth0) is assigned as the host ID. (It can be checked with "lmhostid" command) My license file was written with physical address of eth1. Can you let me know how to change Flexlm ID to correct eth1? Thanks in advance.

January 7, 2005, 02:07	Re: How to change FLexlm Host ID	#2
Brian Guest Posts: n/a	The only thing you can do is request a licence migration, unfortunately. That's the big problem with FlexLM, it's not very intelligent.

January 9, 2005, 21:56	Re: How to change FLexlm Host ID	#3
Jihwan Guest Posts: n/a	I guess this may be fixed if I can change primary netwok device from eth0 to eth1 in Linux. Am I right? If so, can you help me change this in SUSE Linux?

January 10, 2005, 15:32	Re: How to change FLexlm Host ID	#4
Brian Guest Posts: n/a	Not a clue, sorry. Linux not my forte.

January 11, 2005, 04:14	Re: How to change FLexlm Host ID	#5
HVN Guest Posts: n/a	Hello, As Brian suggested you, you need to contact a cd office in order to change your license file. HV

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Use of FlexLM license via VPN	Tim	Main CFD Forum	3	April 28, 2008 16:27
???how to resolve 'FLEXlm' error. plz help!???	rok	FLUENT	1	September 28, 2007 14:29
FLEXlm update or ??	Kasper Skriver	Siemens	2	March 1, 2007 11:38
flexlm error for gambit?	frank	FLUENT	2	October 14, 2004 12:24
How to change the Host ID in windows NT 4	New user	FLUENT	3	September 5, 2000 22:44