Germany, September 23, 2002

The CD adapco Group welcomes all european users to the unique opportunity of understanding of how to set-up and effectively run three dimensional STAR-CD analyses coupled to the one dimensional engine simulation code GTPower.

Description:


Course aims
The course is aimed at giving the STAR-CD user an understanding of how to set-up and effectively run three dimensional STAR-CD analyses coupled to a one dimensional engine simulation Code. The course will use GT-POWER as the engine simulation Code. For some components, a more stable and realistic STAR-CD analysis is obtained by allowing the unsteady STAR-CD analysis results to interact with (influence) the domain boundary conditions. In addition to instruction, the course will provide the STAR-CD user with hands-on experience through use of a worked example. The course also offers the User the opportunity to interact with an experienced engineer who as run several coupled analyses.

Course Content
The training is structured into 3 stages across the duration of 2 days.

Stage 1: Building the coupled models

The one-dimensional and three-dimensional flow models are similar to ones used for stand-alone analyses, but differ in several aspects. These differences include not only the hooks for the actual coupling of the two models, but also modifications to improve the stability of the coupled analysis. The training will cover:

- Using a CAD-generated surface, build a STAR model in pro-am.
- Applying the proper boundary conditions and fluid properties
- Modifying an existing 1D model to couple with the STAR model



Stage 2: Running the coupled models

During the analysis, STAR-CD and GT-Power run simultaneously, exchanging data at the boundaries for each time step. It is necessary to continue the analysis until a cyclically-repeating solution is achieved. The training will include:

- Selecting an appropriate time step size
- Running a sufficient number of cycles to achieve convergence
- Using Excel to plot the data in the ERD files in order to monitor flow behaviour and ***determine convergence.



Stage 3: Post-processing:

The coupled 1D/3D analysis produces a tremendous amount of data, which must be post-processed in order to be able to understand the complex three-dimensional flow behaviours. The training will include:

- Running pro-star in batch mode to produce still images of flow behaviour
- Creating animated GIF's in order to view the flow



The course will include building and running a coarse model. Participants will be allowed to take the files away with them after the training.

To register please visit, www.cd-adapco.com/company/CDAevents.htm

Is the coupling 1D / 3D codes the procedure ? I m interest the CFD with the coupling 1D/3D codes.