 |
 |
 |
|
|
|
[Sponsors] | ||||
July 25, 2013, 13:40
|
Signal 11 when exhaust valve just closes
|
#1 |
|
New Member
Join Date: Jul 2013
Posts: 1
Rep Power: 0  |
Hello,
I am running a 4 stroke engine model in STARCD/es-ice and the model runs with no issues up until the event corresponding to exhaust valve closing. The calculation then abruptly stops and displays Signal 11 - Exiting now. The run was looking OK with no errors/warnings, even though the valve lift was very small, I had a small enough time step to deal with the high speed flow in the valve gap. The calculation just stopped without any other information apart from the signal 11 error. Has anybody seen this before? Thanks Peter |
|
|
|
|
|
March 10, 2014, 08:04
|
|
#2 | |
|
New Member
BK
Join Date: Mar 2014
Posts: 1
Rep Power: 0 |
Facing the same problem of exhaust valve motion...can anybody help
Quote:
|
||
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Free Surface Ship Flow | timfranke | OpenFOAM Running, Solving & CFD | 322 | March 3, 2021 10:04 |
| Automatic exhaust valve closing simulation | hamzamotiwala | STAR-CCM+ | 9 | April 28, 2012 07:49 |
| Exhaust valve simulation | G | CFX | 6 | March 2, 2007 02:34 |
| Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 10:11 |
| Valve Forces in CFdesign | Mike Clapp | Main CFD Forum | 3 | March 8, 2001 15:09 |
Linear Mode
